LG RT-32FZ60RB Service Manual page 15

3.POP POSITION adjustment. (For PIP MODEL)
(1) Press the YELLOW key of SVC remocon to change POP
mode.
(1) POS adjustment ( H POSITION)
- Adjust POS to the inseparable border between main screen
and POP.
*Caution: Adjustment of this mode only adjust to PAL 50Hz of
main screen. But,you must re-check whether or not it is
PAL mode.
(2) Double Window(POS V) vertical location adjustment
- Adjust POS V to be the same vertical location of main screen
and double window.
* Caution: Adjustment of this mode only adjust to PAL50Hz of
main screen. In case of NTSC60Hz, the adjustment needs
not.
(3) POS 50 adjustment
- Change the main input to PAL signal and then adjust POS50
to identity of vertical location.
(4) POS 60 adjustment
- Change the main input to NTSC signal and then adjust
POS60 to identity of vertical location.
6.OPTION Adjustment
6-1. Preparation for Adjustment
1) This option adjustment decides function in accordance with
model.
Press the SVC TX adjustment button(IN-START button) at
SVC mode,then adjust the option at OPTION 1,2,3,4 mode.
2) Mark the option adjustment data like [111,11,111,11] in BOM.
Mark of BOM
O
LEVEL PART NO.
1. 3141VMN382A
The OPTION 1 data is 113,OPTION 2 data is 63,the
oOPTION 3 data is 112,the OPTION 4 data is 201 in this
model.
6-2. Adjustment Method
1) Input data directly by the buttons corresponded with
OPTION1 ??(0~63), OPTION2 ??(0~63), OPTION3
???(0~127).
2) Option4???(0~116) controls corresponding lines directly
relate with OSD and TXT LANG.
3) Select each OPTION function by the CH Up/Down button and
then set up each OPTION by the VOL Up/Down button.
- 15 -
[63,56,112,201]
D D D D
OPTION 1
OPTION 2
OPTION 3
OPTION 4
SPECIFICATION DESCRIPTION
MAIN[63.56.112.201] CHASSIS ASSY