Basic Controls; Speed-Dependent Volume - Becker 1432 Operation Manual

BASIC CONTROLS

Power: The sound system will
operate with the car's ignition switch
PWR
in either the on or off
position. To operate the radio or the
optional CD changer, simply push
the power button located at the lower
left corner of the radio faceplate.
Pushing the power button again will
turn the radio off. A tape cassette can
be played without using the power
button by simply inserting the tape
into the cassette port. As soon as the
cassette is drawn into position, it will
begin to play.
Mode: Pushing this
repeatedly will cause the radio to
MODE
cycle through each of its
operating modes: tuner, cassette
player and CD player
equipped).
1432.doc
Volume: Sound level is adjusted by
means of the volume bar located on the
left side of the radio faceplate. Press
VOLUME
volume or downward to decrease
volume.

Speed-Dependent Volume

Adjustment: A special function
adjusts the volume of sound a preset
amount according to vehicle speed.
Thus, increased wind and road noise
are compensated for as the vehicle is
driven faster. When vehicle speed
and thus ambient sound level drop,
the volume is automatically lowered
button
a preset amount.
Tone: Two tone buttons, identified
by musical notes, are located above
(if so
the volume bar. The left button
controls bass, and the right controls
treble. A bar graph at the left of the
upward to increase
5
radio display indicates relative bass
and treble settings.
To bring both bass and treble tones
to their midrange settings, press both
buttons simultaneously. To bring
either bass or treble tone
maximum level, press and hold the
respective button. If the button is
p
d
released and then pressed again, the
tone level will move toward its
minimum level. To
adjustment direction, the maximum
level must be reached first. The
system is equipped with a memory
function that will store
adjustment tone levels of AM, FM,
cassette and optional CD modes
separately.
to
reverse
the