Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Magner 30
Summary of Contents for Magner 30
- Page 1 OPERATION MANUAL Banknote Counting Machine...
- Page 2 1. Overview 1-1. General Overview ○ CONTROL PANEL ○ HOPPER ○ HOPPER GUIDE ○ STACKER ○ THICKNESS ADJUSTMENT SCREW...
- Page 3 1-2. Control Panel [ Control Panel for Simple Counter ] [ Control Panel for Counter with MG & UV ] ○ RESET/START : RESET & START BUTTON ○ BATCH : PRESET NUMBER OF NOTES ○ SPD : MACHINE SPEED ○ ADD : ACCUMULATED NUMBER COUNT ○...
- Page 4 2. Function of Control Panel RESET / START 2-○ This button can be used to reset number of counting result shown on the display or error messages or to start the machine operation. BATCH 2-○ Expected the BATCH size of note numbers will be selected. When reaching the BATCH number the machine stops operation.
- Page 5 2-○ MG ( Counter with MG Only ) Magnetic sensor function is to examine the presence of the magnetic composition on the surface of the banknotes. When Counting DZD (Algerian Dinars) – MG OFF When Counting USD (US Dollars) – MG ON 2-○...
- Page 6 2-○ MODE When pressing “MODE” button 5 times you may move to “ dAtA Set” showing on the display. Then press MODE button again in order to move to the following mode set-up. You can select each of levels like speed/density/batch/beep on&off/stacker alarm by 9 and 0 button.
- Page 7 3. Recovery of factory set-up In case you need to reset all the set-ups you changed or you would like to recover the factory default configuration you may take the following steps. 9 1 1 1 3-○ press button MODE 3-○...
- Page 8 4. Error Codes Error Codes Reason Solution E-db Two notes have passed Check the Note E-CH 2 or more notes have passed Check the Note E-HF Half size note has passed Check the Note E-JA Notes are jammed in the M/C Remove the Note E-FE Machine runs but no Notes...
- Page 9 5. Specification Main Voltage AC 100-240V, 50/60Hz, 1.5A Power Consumption 40 W Dimension 255(H) X 270(W) X 260(D) mm Weight 6 Kg Document Size 100~185 (D), 60~100mm (H) Speed 1000/1200/1300/1500 per min (for Simple Counter) 1200/1300/1500/1800 per min (for 30UD, 30UMD & 30SUMI Only) Hopper Capacity 300 notes ( up to 500 notes )
- Page 10 “ CAUTION : Any Changes of modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.” “ NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.