Advertisement
Note:
1.Please use the corresponding screw & washer for the holes of the TV back, assembling with
incorrect screw & washer will damage the holes on the TV back, uneven assembly will cause slanted
TV screen
2. Professional knowledge required to assemble the flat panel TV and the wall mount and need at
least 2 people to finish this mounting procedure (Figure 5), Do not attempt to assemble this wall
mount independently to avoid incorrect assembly or any possible injury this may cause.
Step 4: Hang assembled display on the Wall Plate (A).
Note:
This step must require 2 or more professional to finish.
Step 5: Once the display is in position (A) tighten the safety screws on the bottom of each Vertical Arm
Step 6:Post Installation leveling of the display.
Turn the screws located at the top of each vertical arm to provide up to 10mm of height adjustment.
©2016 Metra Electronics Corporation, 460 Walker Street, Holly Hill, FL 32117-2699
Figure
7
Specifications are subject to change without notice.
All trademarks are the property of their respective owners.
1-866-839-9187 • www.metrahometheater.com
Two people are required for this portion of the installation.
Do NOT attempt to do this part of the installation alone
10mm level adjustment
3
Advertisement
