Advertisement
Installation and Mounting Directions:
Step 1
Read manual completely and understand all of the directions prior to starting the installation.
mber) only as described in the directions. .
Use (model nu
Step 2:
Mount the Wall Plate (A) to the wall.
Drywall with Stud mounting;
Concrete Block & Brick mounting; The Wall Plate (A) must be mounted directly to Solid Concrete, Concrete Block
or Brick. Do NOT mount to Mortar joints or hollow wall sections. Once you have located the correct location for the
installation, hold the Wall Plate (A) in position against the wall, verify with a level and mark the bolt location for
each lag. Next drill 3/16" diameter, 1.25" deep hole at the four marked locations. Using 3/16" x 1.25" Hex Head
Concrete screws attach the Wall Plate (A) onto the wall with the supplied lags bolts, level and tighten the lags until
Wall Plate (A) is secured.
Note: Be sure to choose a high quality wall area and enough strong to hole the weight of the TV and
wall mount itself perennially when assembling. The assembly place should be far away from the
water and sunshine .
Step 3: Attach two brackets (B) to TV back.
Attach two brackets (B) to the VESA receptacle's on the back of the display (Figure 4).
Please use the correct screw and washer for the holes on the back of your display, using the incorrect screw
will cause damage to the display. Note that uneven assembly will cause a slanted screen.
Figure 1(keep the wall plate level)
Figure 4
Figure 2
Hollow wall or decorative cardboard
Forbidden
Figure 3
Attention
Figure 5
Forbidden
Figure 6
2
Advertisement
