Advertisement
Quick Links
OWNER'S MANUAL
Important Safety Instructions
Read all instructions before using your
Built-in Vacuum Cleaning System.
WARNING
- To reduce the risk of fire,
electrical shock or injury:
• Disconnect power units electrical
plug before servicing.
• Do not use outdoors or on wet
surfaces.
• Do not allow to be used as a toy.
Close attention is necessary when
used by or near children.
• Use only as described in this
manual. Use only manufacturer's
recommended attachments.
• Do not handle hose, outlets, or
unit with wet hands.
• Keep hair, loose clothing, fingers,
and all parts of the body away
from the openings and moving
parts.
• Do not pick up anything that
is burning or smoking, such as
cigarettes, matches, or hot ashes.
• Do not use without dust bag and/or
filters in place, if required by power
unit.
• Use extra care when cleaning on
stairs.
• Do not use to pick up flammable
or combustible liquids such as
gasoline or use in areas where they
may be present
• Do not store flammable or
combustible product within three
(3) feet of power unit.
SAVE THESE INSTRUCTIONS!
Advertisement
Related Manuals for Hide-A-Hose Vacuum Cleaner
Summary of Contents for Hide-A-Hose Vacuum Cleaner
-
Page 1: Important Safety Instructions
OWNER’S MANUAL Important Safety Instructions Read all instructions before using your Built-in Vacuum Cleaning System. WARNING - To reduce the risk of fire, electrical shock or injury: • Disconnect power units electrical plug before servicing. • Do not use outdoors or on wet surfaces. - Page 2 TO OpERATE: Open the door and pull out the amount of hose you need. (Note: You will feel the hose stop when you get to the end. If the hose comes completely out of the wall, simply reinsert the hose several inches back into the inlet.) Place the locking mechanism...
-
Page 3: Troubleshooting
RF handle battery replacement Open the battery casement. Locate the battery casement just below the metallic nozzle at the front of the RF handle (the lid of the battery casement can be identified by a white outlined battery icon). Insert a small flat head screwdriver into the slot at the base of the battery casement...