Figure 57. Installing the storage drive
5. Connect the storage drive cable to the system board.
6. Complete the replacement. See "Completing the parts replacement" on page 58.
Replacing the power button board
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See "Replacing the monitor stand" on page 20.
2. Remove the LCD panel. See "Removing the LCD panel" on page 22.
3. Remove the storage drive. See "Replacing the storage drive" on page 32.
4. Disconnect the power button board cable from the system board.
5. Replace the power button board.
Figure 58. Removing the power button board
.
Chapter 4
Replacing hardware
35