Table of Contents
Advertisement
Quick Links
Installation and Maintenance Instructions
Reliance Worldwide Corporation (UK) Ltd
®
Heatguard
Planar
Worcester Road,
Thermostatic Mixing Valves
Evesham,
Worcester,
WR11 4RA,
UK
Tel: +44 (0)1386 712 400
Fax: +44 (0)1895 712 401
www.rwc.co.uk
Thermostatic mixing valve for use in group mixing applications.
Reliance Worldwide Corporation (UK) Ltd reserves the right to make changes to the
product which may affect the accuracy of information contained in this leaflet.
ZINS530002_004_11-15
Advertisement
Table of Contents
Related Manuals for RWC Heatguard Planar 230
Summary of Contents for RWC Heatguard Planar 230
- Page 1 WR11 4RA, Tel: +44 (0)1386 712 400 Fax: +44 (0)1895 712 401 www.rwc.co.uk Thermostatic mixing valve for use in group mixing applications. Reliance Worldwide Corporation (UK) Ltd reserves the right to make changes to the product which may affect the accuracy of information contained in this leaflet.
- Page 2 Contents Notes Reliance Worldwide Corportation (UK) Ltd..2 General Information........... 3 Specification............3 Flow rates............4 Installation............4 Commissioning..........5 Dimensions............7 Maintenance............8 Spares & Care Instructions....... 11 Troubleshooting..........12...
- Page 3 With group offices and manufacturing plants throughout the world RWC offers a wealth of knowledge and expertise which is reflected throughout our products. Being part of many specialised trade associations and having our own UKAS accredited laboratory, makes...
-
Page 4: General Information
General Information Troubleshooting Please read these instructions carefully and ensure that the mixing valve is I can only get hot or cold water from the outlet ® installed to Local Authority Regulations.The Heatguard Planar thermostatic Check that the valve is connected up correctly, with the hot and cold mixing valves are suitable for use on low pressure hot and cold water supplies connected the corresponding fittings on the valve. - Page 5 Spares Flow Rates 4.00 Description Product Code Full internal service kit for Planar 230: SKIT230100 3.50 Full internal service kit for Planar 330: SKIT330100 Full internal service kit for Planar 430/530: SKIT430001 3.00 Planar 230/330 4 in 1 adaptor service kit: SKIT300020 Planar 430/530 4 in 1 adaptor service kit: SKIT300016...
- Page 6 Flush out pipes - It is important that both supply pipes are flushed 6. With the spring removed the main o-ring seal can be seen. This should thoroughly before connecting the thermostatic valve to ensure that no pipe be inspected, cleaned and re-greased. If the o-ring is damaged it must work or plumbing debris enters the valve.
- Page 7 Once the valve is accessible for servicing, proceed as follows: Setting the pre-set temperature in the non-adjustable form. Remove the cap and the cam. Refit the cap and, at approx. 50% flow rate, adjust the 1. Access has to be gained to the thermostatic mechanism. To do this remove the control knob and temperature cam.
- Page 8 Maintenance Dimensions If the performance of the thermostatic valve has deteriorated over time, the valve will require maintenance. 1. First isolate the hot and cold supplies via the service valves and thoroughly flush the line strainers in the 4 in 1 fittings. The system should be checked and any additional strainers in the supply should also be flushed.
Need help?
Do you have a question about the Heatguard Planar 230 and is the answer not in the manual?
Questions and answers