Download Print this page

Sunex 8013ADELUXE Operating Manual

Service cart with locking top & drawers includes pry bar holder and side work bench

Advertisement

Quick Links

GUARANTEED TO PERFORM
OPERATING MANUAL
Read and follow all instructions in User's Manual. It is the responsibility of the owner to make sure all personnel
read this manual prior to using the device. It is also the responsibility of the device owner to keep this manual intact
and in a convenient location for all to see and read. If the manual or product labels are lost or not legible, contact
Sunex Tools
read and discussed with the operator in the operator's native language by the purchaser/owner or his designee,
making sure that the operator comprehends its contents.
PARTS LIST
Examine box contents, then proceed with following instructions.
Locking Drawer Assembly
Bottom Tray
WARNING
Read and follow all instructions in User's Manual. • Do not load
carts beyond rated capacity (350 lbs.). • Lock lid and drawers before
moving. • Apply brake on locking casters anytime cart is in place.
• Units can tip or fall causing damage or personal injury. • Cart is
designed to roll easily on flat surfaces and should not be used on
uneven or inclined surfaces. • Do not open more than one
loaded drawer at a time. •Do not stand on or step in drawers. • Keep
children away from unit. • Wear gloves when lifting edges. • This
product may contain one or more chemicals known to the State of
California to cause cancer and birth defects or other reproductive
harm. Wash hands thoroughly after handling. • Failure to heed these
warnings may result in personal injury and/or property damage.
8013ADELUXE/8013ABKDELUXE/8013ABLDELUXE Rev. A
MODEL 8013ADELUXE, 8013ABKDELUXE,
8013ABLDELUXE Rev. A SERVICE CART
INCLUDES PRY BAR HOLDER AND SIDE WORK BENCH
for replacements. If the operator is not fluent in English, the product and safety instructions shall be
®
Chrome Legs (2)
(With Inserts Installed)
Long Drawer Handle (1)
Drawer Handle
Screws (14)
WITH LOCKING TOP & DRAWERS
Non-Locking Casters (2)
Keys
(Attached
to Legs)
Short Drawer Handles (4)
Rubber Mallet
Table or Workbench
Locking Casters (2)
Pry Bar Holder
TOOLS NEEDED
Phillips Head
Screwdriver
2 People
© Copyright 2014, Sunex Tools
M6x42 Bolts,
Nuts, & Washers
(8 Pcs. Each)
Side Work Bench
6mm Wrench
®
7/3/14

Advertisement

loading
Need help?

Need help?

Do you have a question about the 8013ADELUXE and is the answer not in the manual?

Questions and answers

Summary of Contents for Sunex 8013ADELUXE

  • Page 1 California to cause cancer and birth defects or other reproductive harm. Wash hands thoroughly after handling. • Failure to heed these Table or Workbench 2 People warnings may result in personal injury and/or property damage. ® © Copyright 2014, Sunex Tools 8013ADELUXE/8013ABKDELUXE/8013ABLDELUXE Rev. A 7/3/14...
  • Page 2 Locking Drawer Assembly. Tighten bolts until parts fit together firmly. Repeat steps 1 and 2 for other end of cart, using remaining side accessory. Table or workbench Pry Bar Holder 8013ADELUXE/8013ABKDELUXE/8013ABLDELUXE Rev. A 7/3/14...
  • Page 3 Using a rubber mallet, hammer the casters into place until the stem is no longer visible. Repeat with other casters. Ensure that both locking casters NOTE are on same end of the cart. Once casters are installed, stand cart upright. Assembly is complete. 8013ADELUXE/8013ABKDELUXE/8013ABLDELUXE Rev. A 7/3/14...
  • Page 4 EVA Foam for Trays / 10 pk. 1111. EVA Foam for Drawers / 10 pk. 8004SSM Rubber Liner for Side Shelf / 10 pk. RSDECAL02 Black Decal for 8013ADELUXE RSDECAL03 White Decal for 8013ABKDELUXE and 8013ABLDELUXE REPLACEMENT PARTS LIST Item Part # # Req’d...

This manual is also suitable for:

8013abkdeluxe8013abldeluxe