GREE ELECTRIC GWH09QB-K6DNA1C/I Service Manual page 139

Service Manual
Step Procedure
9.Remove motor and motor support
motor support
Remove the 4 tapping screws fixing the motor.
Pull out the lead-out wire and remove the
motor. Remove the 2 tapping screws fixing
the motor support. Lift motor support to re-
move it.
motor
10.Remove clapboard sub-assy
Loosen the screws of the Clapboard Sub-Assy .
isolation sheet
The Clapboard Sub-Assy has a hook on the
lower side. Lift and pull the Clapboard Sub-Assy
to remove.
Installation and Maintenance
136