Advertisement
STEP 2:
Install P4 End Leg Panels with Graphic Artwork and P5 End Leg Panels without Graphic Artwork to
Legs using H3 Phillips Round Head Screws as shown in FIGURE 2.
Tighten, but do not strip out H3 Screws.
Thread P6 Leg Levelers to Legs as shown in FIGURE 2.
NOTE:
Graphic Artwork must
face out and upside down
IMPORTANT NOTE:
Slightly push in on
all connectors to insure
proper connections.
THIS STEP REQUIRES FOUR OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
All Rights Reserved.
© 2016 Escalade Sports
PARTS REQUIRED:
24 pcs - H3 Phillips Round Head Screw
2 pcs - P4 End Leg Panel with Graphic Artwork
2 pcs - P5 End Leg Panel without Graphic Artwork
4 pcs - P6 Leg Leveler
P4
P6
P5
H3
P6
FIGURE 2
H3
P6
7
P6
NOTE:
P5
Graphic Artwork
must face out and
upside down
P4
H3
For Customer Service Call 1-888-996-2729
H3
Advertisement
