Gain - Clavia Nord Electro 6 User Manual

Range: Roland EV7 (default), Yamaha FC-7, Korg, Fatar/Studiologic

GaIN

this setting allows for adding some gain to the pedal signal. this can be
useful if an attached pedal does not reach its maximum level or setting.
Range: 1 - 10
10 - local coNtrol
MIdI local control determines if the Nord Electro 6 keyboard and panel
will control internal sound engines and programs or only transmit MIdI.
local control On is the normal "play mode". When local control is in Off
mode, front panel and keyboard actions are transmitted via MIdI only.
Range: On (Default), Off
M Local always defaults back to "On" every time the Nord Electro 6 is
powered on
11 - cHaNNEl
GloBal
this sets the transmitting and receiving MIdI channel for the Global
channel. the Global channel transmits all keyboard, pedal and panel
actions as MIdI signals. It can also be used as a receiving channel with
full control of the entire Electro 6.
Range: 1-16, Off (Default 1)
ExtErNal KBd
this sets the channel for receiving MIdI from an external keyboard when
using the "External KBd to lo" function - see page 17.
Range: 1-16, Off (Default 16)
12 - coNtrol/ProGraM cHaNGE ModE
cc (coNtrol cHaNGE)
this allows you to set if you want your Nord Electro 6 to transmit and/or
receive MIdI controller Messages or not on the Global channel.
Range: Off, Send, Receive, Send & Receive (Default)
Pc (ProGraM cHaNGE)
this setting determines whether your Nord Electro 6 transmits and/or
receives MIdI program change Messages, on the Global channel.
Range: Off, Send, Receive, Send & Receive (Default)
13 - traNsPosE MIdI at
When set to In, active transpose values (global and/or set per program)
are not applied to outgoing MIdI, but only to incoming MIdI data. In Out
mode sent MIdI notes are transposed but not incoming ones.
Range: In (Default), Out
soUNd MENU
1 - PIaNo strING rEs lEvEl
sets the level of the string resonance feature that can be turned on for
selected pianos (acoustic Med, lrg and xl sizes).
Range: +/- 6 dB (0 dB default)
2 - B3 orGaN toNEWHEEl ModE
sets the level of tonewheel crosstalk and cable leakage artifacts of the
B3 organ model.
Range: Clean, Vintage 1 (default), Vintage 2
3 - B3 orGaN clIcK lEvEl
this sets the level of the Key click for the B3 organ model.
Range: Low, Normal (default), High
4 - B3 orGaN KEYBoard trIGGEr PoINt
this setting allows for changing how the Nord Electro 6 keyboard trig-
gers the B3 sound. When "High" is selected, it will be triggered before
the key is fully depressed, which is more similar to how a real B3 works.
Range: High, Low (Default)
5 - rotarY sPEaKEr
there are two available settings for the 122 rotary speaker. With the
122 setting the "virtual microphones" are placed further away, while with
122 close they are placed closer to the cabinet.
Range: 122 (Default), 122 Close
6 - rotarY BalaNcE
this parameter determines the sonic balance, expressed as a percent-
age, between the bass rotor and the treble horn of the rotary speaker.
Range: 70/30, 60/40, 50/50 (default), 40/60, 30/70
7 - rotarY rotor
sPd (sPEEd)
this determines the speed of the rotary speaker woofer rotor.
Range: Low, Normal (default), High
acc (accElEratIoN)
this determines the acceleration and deceleration time of the rotary
speaker woofer rotor.
Range: Low, Normal (default), High
8 - rotarY HorN
sPd (sPEEd)
this determines the speed of the rotary speaker treble horn.
Range: Low, Normal (default), High
acc (accElEratIoN)
this determines the acceleration and deceleration time of the rotary
speaker treble horn.
Range: Low, Normal (default), High
11. MENUs | 27