Operation Overview - Horizon International PF-P280 Service Manual

2. Operation Overview

1. Turn on power switch.
- When feed tray lever is raised, motor will rotate. Feed roller may makes 1 turn.
- When feed tray lever is lowered, motor will not rotate.
- Display will indicate the number 0.
2. When feed tray lever is raised, lower feed tray lever.
- Motor will stop.
3. Pile sheets on feed tray, adjust feed guide, and then select sheet fold pattern and sheet size.
4. Raise feed tray lever and press test feed button.
- Clutch will be activated, feed roller will make 1 turn to feed a sheet. Display will indicate the
number 1.
- If sheet is not piled on feed tray, feed roller will not turn and the display number will remain 0.
5. Press start/stop button.
- Clutch will be activated and sheets will be fed continuously.
- Display will indicate the number of counted sheets.
6. Sheet feeding stops.
- When start/stop button is pressed, clutch will be off and only feed roller will stop.
- When feed tray lever is lowered, clutch will be off and feed roller and motor will stop.
- When feed tray empties, only feed roller will stop.
7. Turn off power switch.
- The display number will be cleared.
2