Given Imaging Bravo User Manual page 16

c. Press
Enter
of
value Preferences
֠
4. The Preferences screen allows you to define setting that affect all studies.
• Show pH Value: If
during studies. If
study. The factory default is
• Button Beep: If
button. The factory default is
• Capsule LED Blink: If
signals are received. The factory default is
• Set Date/Time: Once set, the recorder maintains the correct date and time. You
should only have to change this again if there is a time change (for example,
going on or off of Daylight Savings), or if the recorder battery is allowed to fully
discharge.
• Date Format: You can set the date format to
factory default is
• Time Format: You can set the time format to
(military)
• PC Software: Select the software used to record, view, and analyze the data
from studies. The choices are
software, as well) and
• Language: Select the language for the recorder interface. The choices are
English, Danish, Dutch, Finnish, French, German, Italian, Norwegian,
Portuguese, Spanish, and Swedish. The factory default is
• Backlight Duration: Set the time that the recorder screen backlight stays on
after a button is pressed. The choices are 15, 30 (factory default), 45, or 60
seconds.
5. To return one level up in the menu tree, press
֠
Bravo pH Monitoring System
. You move on to the first screen of the next setting:
.
Note
At any time you may select Settings from the Main screen and
access Preferences to review and set the parameters.
, the current pH value appears on the recorder screen
Yes
, pH values are only displayed for the first 30 minutes of a
No
, the recorder beeps when the patient presses a symptom
Yes
, the recorder capsule LED blinks when the capsule
Yes
MM-DD-YY
. The factory default is
RAPID pH
Note
Once you have set preferences, you will not need to reset them
unless:
• you want to change something, or
• the recorder battery is fully discharged.
.
No
.
Yes
.
Yes
MM-DD-YY
.
12-hour (AM/PM)
.
12-hour
(factory default applies to Reflux
AccuView
.
.
ESC
12
Show pH
or . The
DD-MM-YY
or
24-hour
.
English
User Guide