Page 1
TQ6 + Throttle Quadrant USER'S MANUAL Rev. 1.0 - September 2018 1. PACKAGE LIST A) TQ6+ Throttle quadrant B) Clamp for TQ6+ C) Screws for clamp D) Allen key TQ6+ | User's manual...
2. CLAMP ASSEMBLY You have two ways for assembling the clamp: (1) on the back or (2) on the bottom, to get the best position for you. If you choose the bottom position, you must unscrew the two front rubber feet before you screw the clamp. Connect the USB cable to the computer where the flight simulator software is running.
Page 3
3. CONTROLS 4. CALIBRATION ON WINDOWS Adjusting the lever’s hardness If you want you can adjust the lever’s hardness tightening the wheels (K & It is not necessary the calibration on windows because the J) located on the left and the right sides of the device. device is calibrated from factory but you can use the calibra- tion Windows tab to test the device.
Page 4
5. CONFIGURATION ON FLIGHT SIMULATION SOFTWARE As the TQ6 + control interacts with any computer as a normal HID device (Joystick), this make it compatible with any FLIGHT SIMULATOR software. The follow tables tells how to configurate the TQ6 + on the most popular FLIGHT SIMULATOR software, FSX-Prepar3D and X-Plane. FSX-Prepar3D TQ6 + Configuration options on FSX-Prepar3D Through VFTest&Calibrate-S...
Page 5
X-Plane TQ6 + Configuration options on X-Plane X-Plane You have to use the Soft VF-Test&Calibrate-X downloadable from our web-site: www.virtual-fly.com/en/downloads Full functionality: Throttle-Rev, Propeller-Fth, Mixture-CutOFF. Let you know that PROPELLER and MIXTURE axes must be configura- ted on X-Plane menus and THROTTLE axes must be configurated on VF-Test&Calibrate-X.
Need help?
Do you have a question about the TQ6+ and is the answer not in the manual?
Questions and answers