Advertisement
7. Cleaning and Storage
(1) After finishing the practice, you need to disconnect the white connector from the Plastic
Bottle and then press the Rapid Blood Circulation Switch to remove blood in the tube.
(2) Fill the bottle with clean water after expelling simulated blood.
(You can reuse the simulated blood if you keep the blood in an empty container)
(3) Reconnect the white connector to the Plastic bottle.
(4) Press the Rapid Blood Circulation Switch in order to circulate the clean water to clean up the tube.
(5) Disconnect the white connector from the Plastic Bottle and then press the Rapid Blood
Circulation Switch to remove clean water in the tube just as "(1)".
(6) After pouring the water out of the bottle, disconnect the connection tubes.
(7) If water leaks out from the end of connector, remove water with the tissue paper or soft cloth.
(8) Please keep the product carefully in the Storage case.
10
Advertisement
