Related Manuals for Inline in1503
Summary of Contents for Inline in1503
- Page 1 im Vertrieb von CAMBOARD Electronics IN1 503 COMPONENT VIDEO TO RGB TRANSCODER IN 1 503 OPERATION MANUAL www.camboard.de Tel. 07131 911201 ce-info@camboard.de Fax 07131 911203...
- Page 2 Para prevenir un incendio, reemplace solo con el mismo tipo de fusible. CE COMPLIANCE All products exported to Europe by Inline, Inc. after January 1, 1997 have been tested and found to comply with EU Council Directive 89/336/EEC. These devices conform to the following...
- Page 3 PAL scan rates. The component video output connectors on professional / industrial video equipment is often marked as R-Y / B-Y / Y. On DVD players it is usually marked as Y / CB / CR. The IN1503 is also compatible with HDTV analog component video signals at virtually any resolution.
- Page 4 1. Place / install the IN1503 at the desired location. Make sure that the unit is seated on a flat surface or is securely installed in a standard 19” equipment rack in a 1-U rack space (using the optional IN9080 rack shelf).
- Page 5 Sync Stabilization Enabled Pins 2 & 3 Connected Note: Sync stabilization is only functional when the IN1503 is in RGBHV OUTPUT MODE. The J2 setting has no effect on the output when the unit is in COMPOSITE SYNC MODE. The SYNC STABILIZATION ENABLED MODE (pins 2 & 3 connected) is designed for use with progressive scan signals containing copy guard protection.
- Page 6 IN9210 Rack Mountable Power Supply, powers up to 10 9VDC / 12VDC devices Rack Mount Hardware IN9080 Rack Shelf IN9088B Blank Panel - Fills Space When Mounting One IN1503 Installation Cables IN7000FP-5 Series RGBHV Cable - Standard Resolution, Plenum Cable available...
- Page 7 Setting the J2 jumper (internal) for the sync stabilization setting may help the problem (see SYNC STABILIZATION section on page 3). If problems persist, call INLINE Technical Services at (714) 921-4100 for further assistance. © 2000 - INLINE, INC.
- Page 8 If equipment fails because of such defects and INLINE is notified within two (2) years from the date of shipment, INLINE will, at its option, repair or replace the equipment at its plant, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications.
Need help?
Do you have a question about the in1503 and is the answer not in the manual?
Questions and answers