Page 1
im Vertrieb von CAMBOARD Electronics IN1 501 COMPOSITE VIDEO TO S–VIDEO / S–VIDEO TO COMPOSITE VIDEO TRANSCODER IN 1 50 1 OPERATION MANUAL www.camboard.de Tel. 07131 911201 ce-info@camboard.de Fax 07131 911203...
Para prevenir un incendio, reemplace solo con el mismo tipo de fusible. CE COMPLIANCE All products exported to Europe by Inline, Inc. after January 1, 1997 have been tested and found to comply with EU Council Directive 89/336/EEC. These devices conform to the following...
Note: The front panel controls are only functional in S-Video output applications. Rack Mountable - Two IN1501 transcoders can be rack mounted side-by-side in a 1U rack space using the optional IN9080 rack shelf. A single IN1501 can be rack mounted with the IN9080 rack shelf and an IN9088B blank plate.
1. Place / install the IN1501 at the desired location. Make sure that the unit is seated on a flat surface or is securely installed in a standard 19” equipment rack in a 1-U rack space (using the optional IN9080 rack shelf).
When the switch is in the Off position, the trap filter is selected. Note: The comb / trap filter can be selected manually, however, if the IN1501 detects an unstable incoming video signal that the comb filter will not easily adapt to (i.e. signals containing artifacts, weak amplitude, large amounts of variability in the lumina signal, etc.),...
If equipment fails because of such defects and INLINE is notified within two (2) years from the date of shipment, INLINE will, at its option, repair or replace the equipment at its plant, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications.