Programming - abc Fleck 5600SXT Manual

Programming

Step 1 – Confirm All Product Components
**Note during normal operations it is normal for the water level to be
anywhere from 1/3 to 2/3 full of water, depending on the salt level at the
Programming Your Hardness Water Softener
Step 1. Conduct hardness test on your water to obtain this number.
Step 2. Press & Hold both 'Up' & 'Down' arrows together until screen
changes to DO (Day Override). This may take 5 seconds before change.
Step 3. Select # of days for DO. We suggest 14 days. Press 'Cycle' button
(icon of arrows in diamond pattern) after days are set.
Step 4. Set Regeneration Time (RT). We suggest setting to 2:00am. This is
the time that the system will regenerate. Press 'Cycle' button after setting
time.
Step 5. Set Hardness (H). Based on hardness test number. Press 'Cycle'
button after set.
Step 6. Reserve Capacity (RC) should be set at 75 gallons per person in
household. Example: 2 people x 75 gal = 150 reserve capacity. Press 'Cycle'
button to complete.
1. Add 3 bags of salt pellets or rock salt along
with 5 gallons of water to the brine tank.
**Add only 2 bags if using a SPACE SAVER
system.
time of regeneration.