Atdec TH-TVCB Installation Instructions

Component Checklist
Frame
Mounting Bracket
Column
Extension Washer (x4)
Spanner (x2)
IMPORTANT INFORMATION:
! IMPORTANT - Install TV Cart as per installation instruction.
! This product supports a maximum load of 50kg (110lbs.).
! This product supports VESA mounting hole configurations: From 200 x 200mm to 800 x 600mm.
! The manufacturer accepts no responsibility for incorrect installation.
Step 1. Check Components
Check you have received against the component checklist and hardware above.
Step 2. Assemble Base
Frame
UNLOCKED
LOCKED
For a VESA Hole Configuration of 200x200mm ONLY go to Step 4 and skip Step 5 & 6.
For a VESA Hole Configuration of over 200x200mm skip Step 4 and go to Step 5.
Step 4A.
Attach Tilt Mechanism to Display
Spacer
(optional, use
only for recessed
mounting holes.)
TOP
Tools Required:
• Phillips head screw driver
Tilt Mechanism
Shelf Extension Bracket (x4)
Shelf Mounting Plate Top Cap (x4)
OR
Supplied
Spanner
Caster
Display Mounting
Screw
Washer
Tilt Mechanism
Installation Instructions
HARDWARE
Shelf Mounting
Screw
M8x16 Screw
Caster (x4)
(x4)
M8 Screw (x6)
Allen Key
Step 3. Fasten Column to Base
Supplied Allen Key
Base
Step 4B.
Insert Tilt Mechanism to Column
INSERT
TH-TVCB Mobile TV Cart
Display Mounting
Screws (x6 each)
M8 Spring
Washer (x6) M4x16/35mm
M5x16/35mm
Spacer (x6)
M6x16/35mm
M8x16/35mm
M5 Washer (x6)
M8 Washer (x10)
1/4" Washer (x6)
M8x10 Screw (x8)
Column
M8 Screws
Spring Washer
Supplied Allen
Key