Page 1
EC 17 / 19 Series Single Rail LCD Console Quick Installation Guide Rev 2.0...
Page 2
Single Rail LCD Console QIG Notes: 1. Please check all peripherals according the list before installation. To make sure that the whole unit was not damaged and lost during shipping process. If you encounter any problem, please contact your dealer. 2.
Page 3
Single Rail LCD Console QIG 2. Install front and rear bracket on cabinet. 3. Tight-up two rear screws. 4. Repeat step 1~3 for the other side. 5. Pull rail until it lock and keep the part A in front of the rail (Both sides).Then push console into left and right rails.
Page 4
Single Rail LCD Console QIG 6. Pull rail–release switch (left and right at the same time) then push console to the end. Rail-release switch 7. Install two screws in rear of the console (Both sides). Remove protective tapes. Single port 8.