Cruise Control - Subaru WRX 2019 Quick Manual

Cruise Control

To activate the cruise control, press
the " " button. The indicator light
on the instrument panel will turn
on. To deactivate cruise control,
press the " " button again.
To cancel the cruise
control, push the brake
pedal or press the
"CANCEL" button.
If you have a manual
transmission, you can
push in the clutch pedal.
Increase Speed
Push up the "RES/SET" switch to the
"RES" side; hold until your vehicle
reaches the desired speed and release.
To increase speed using the accelerator
pedal, press the pedal until you reach
the desired speed. Push down the
"RES/SET" switch to the "SET" side
to set the speed.
SI-DRIVE (WRX only;
if equipped):
Press S#/I for Sport
Sharp mode, S/I
for Sport mode, or
either button for
Intelligent mode.
Decrease Speed
Push down the "RES/SET" switch to
the "SET" side; hold until your vehicle
slows to the desired speed and release.
To decrease the speed using the brake
pedal, press the pedal to release
cruise control temporarily. When the
speed decreases to the desired speed,
push down the "RES/SET" switch to
the "SET" side to set the speed.
To resume your
speed after canceling,
push the switch to
the "RES" side.
Press the accelerator pedal
until your vehicle reaches
the desired speed. Push
the switch to the "SET"
side and release. Ease
off the accelerator pedal.
Your vehicle will maintain
the desired speed.
17