Automatic Climate Control System; Operation In Manual Mode - Subaru WRX 2019 Quick Manual

Controls
1
2
Automatic Climate
Control System
Automatic On and Off
1
This system automatically controls
outlet air temperature, fan speed, air
flow distribution, air inlet control, and air
conditioner compressor operation. Press
"AUTO" to activate. Press "OFF" to turn
off the system.
Temperature Control Dial
2
Rotate the dial clockwise to increase
the temperature or rotate the dial
counterclockwise to decrease the
temperature and maintain a comfortable
climate within the driver and passenger
compartment. The temperature is
displayed digitally on the screen.

Operation in Manual Mode

Recirculated/Outside Air Button
3
Press the air inlet selection button to
prevent outside air from being drawn
into the passenger compartment. Press
the button again to allow outside air
into the compartment. TO PREVENT
WINDSHIELD FOGGING, DO NOT
REMAIN IN THE RECIRCULATED MODE
FOR AN EXTENDED PERIOD OF TIME.
14
6
3
4
(WRX Only)
7
8
Located in the multi-function
display; top center of dash
Fan Speed Control Knob
4
Rotate the fan speed control knob to
select the desired fan speed.
Air Flow Mode Selection Dial
5
Turn the "MODE" dial to select the
desired air flow mode. The selected air
flow mode – either ventilation, bi-level,
heat or heat-defrost – is shown on
the display.
Air Conditioner Button
6
Press the "A/C" button to activate the air
conditioning. Press it again to turn off the
air conditioning.
Defroster Button
7
Press the button to defrost or dehumidify
the windshield and front door windows.
Rear Window Defogger Button
8
Press the button to turn on the defogger.
It will automatically shut off after about 15
minutes. If the window clears before that
time, you can press the button again to
turn it off. If equipped, the outside mirror
defogger and windshield wiper deicer will
also activate.
5