Net Guard - Sanyo SCP-3200 User Manual

Tip:
When Ready Link Guard is set to on, a warning message will
be displayed. Press Continue (left softkey) to continue.
(See "Setting Ready Link Guard" on page 160.)
While connecting, the following message will be displayed on
the screen: Connecting... Please wait.
If you had a previous Sprint Vision connection, the last page
you visited will be displayed when you open your browser.
When this occurs, you may not see the "Connecting..."
message when you start the session. Though the browser is
open, you are not currently in an active data session — that is,
no data is being sent or received. As soon as you navigate to
another page, the active session will start and you will see the
"Connecting..."message.

Net Guard

When you first connect to the Web, the Net Guard will be
displayed to confirm that you want to connect. This feature
helps you avoid accidental connections. You can disable the
Net Guard in the future by selecting Always Auto-Connect
when the Net Guard is displayed.
To change your Net Guard settings:
Select
Select On to activate the Net Guard.
Select Off to deactivate the Net Guard.
Note: When enabled, the Net Guard appears only once as long as you
have not turned the phone off and on.
> Settings > Data > Net Guard.
Section 3B: Sprint Vision 217