Key Points; Replacing The Fuse - Carnation CR1500 User Manual

User Manual
Jam
Mainloop Broken
5. Sensitivity Parameters Setting
You may encounter the following problems during counting/sorting:
■ Machine doesn't sort the notes properly;
■ Machine frequently recognizes good notes as unfit notes;
Please contact your technician/dealer to have the machine's sensitivity parameters adjusted.
In case of a technical problem that can't be solved by operator, please contact your supplier.

Key Points:

■ If the room temperature is lower than 20℃, wait 3 minutes after turning the machine on before
operating.
■ The machine should be operated in a room with good ventilation, and kept away from strong
sunlight and/or magnetic field.
■ The machine must be plugged into grounded electric outlets ONLY.
■ The voltage must be in the range of 100~240V AC to avoid malfunction / breakage.
■ All external rollers and wheels must NOT be oiled or greased to avoid malfunction.
■ Dusts on CIS image detecting module, IR sensors, and magnetic sensor must be thoroughly
cleaned at least once a week. You may remove dust build-up on the exposed parts of the
machine with the brush provided.
NOTE: Do not use any chemicals to clean this machine.

Replacing the fuse

If the machine doesn't turn on, it may be caused by a burnt fuse. Open the fuse cover holder,
and replace the fuse.
Some foreign objects inside the machine, or banknote jammed.
Open the back cover to remove them.
Turn off the machine and restart it.
20