Mlevel Installation; Dismantling; Application - GARANT mLevel User Manual

3.

mLevel installation

The working height of the manually adjustable workstation can be
adjusted between 750 – 1000 mm in 25 mm steps. To do this, support the
DE
worktop in the centre and unscrew the two screws on the inside and back
of each support leg.
Now the lower part which slides into the upper part can be adjusted to the
desired working height. Screw the four screws back into the tapped holes
and tighten them finger-tight.
EN
4.

Dismantling

FR
X
X
5.

Application

WARNING!
Risk of injury due to the workbench tipping over and workpieces
IT
falling from it.
If a workpiece overhangs the edge of the workbench there is a risk of it
tipping over.
X
X
X
ES
18
Clear loose parts from the workbench and clean it.
Disassemble the workbench in the reverse order to assembly.
Secure the overhanging workpieces.
Before using the workbench, always check it for damage.
Keep the workbench and accessory parts clean.
NOTE: If workpieces overhang there is a risk they may tip over.