RCA RCRN05BHZ Owner's Manual

RCRN05BHZ US 00 2621
4.
When you've finished entering
Step 2: Program your remote
the five-digit code, keep holding
down the device key and look at
the POWER key.
To use this universal remote with your home entertainment
system, first you need to program it to control your devices.
Is the POWER key
There are four ways you can program the universal remote to illuminated?
RCRN05BHZ operate your devices. Try them in the order listed.
YES: You're done! You've programmed this device key.
• The Direct Code Entry lets you enter a code from the
NO, it blinked four times and turned off: You have
accompanying code list for your brand of device.
either entered a code number that is not in the code lists
Universal Remote Control
or missed a step in the code entry procedure. Try step 3
• The Brand Code Search searches through the codes for
Owner's Manual again.
select brands of devices.
Manual del Propietario (parte posterior) • The Auto Code Search goes automatically through all the NOTES
codes for the device you're trying to control.
Test the remote with the device to make sure the device
key is programmed with the correct code for maximum
FCC Statement: • The Manual Code Search lets you manually go through
This device complies with part 15 of the FCC Rules. Operation is subject to the functionality. If some features don't work, try a different code
all the codes for the device you're trying to control.
following two conditions: (1) This device may not cause harmful interference,
in the list.
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Remember to enter the code for future reference in the box
Note: This equipment has been tested and found to comply with the limits
provided in the Code Retrieval section of this manual.
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
Direct Code Entry
are designed to provide reasonable protection against harmful interference
If your brand isn't listed in the code list, use one of the Code
in a residential installation. This equipment generates, uses and can radiate
Direct Code Entry lets you enter a code from the accompanying
radio frequency energy and, if not installed and used in accordance with Search methods to program the remote control. (Refer to the
the instructions, may cause harmful interference to radio communications. code list for your brand of device.
Auto and Manual Code Search methods.)
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and If you release the device key any time during the Direct Code
on, the user is encouraged to try to correct the interference by one or more of
TIP: Each device key is associated with a type of device— Entry procedure, the POWER key blinks four times, and the
the following measures:
the TV is preset to search for TVs, SATELLITE/CABLE for process is exited. The last programmed code under the
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver. satellite receivers or cable boxes, STREAM for streaming device key is retained.
• Connect the equipment into an outlet on a circuit different from that to players, DVD/BLU RAY for DVD and Blu Ray players, and
which the receiver is connected.
AUDIO/SOUNDBAR for audio devices and soundbars. To
• Consult the dealer or an experienced radio/TV technician for help.
program a device key for a different type of device, see the
Caution: Any Changes or modifications not expressly approved by the party
Brand Code Search
responsible for compliance could void the user's authority to operate this Changing a Key's Device Type section.
equipment.
The Brand Code Search goes through only the codes for one of
Industry Canada Regulatory Information
the select brands listed in the accompanying code list. If your
CAN ICES-3 (B)/NMB-3 (B)
Avis d'Industrie Canada brand of device is listed, this search can be very quick and easy.
CAN ICES-3 (B)/NMB-3 (B)
1.
Manually turn on the device you
SAVE THIS MANUAL AND THE CODE LISTS! TIPS: Each device key is associated with a type of device—
want to control.
Remote controls can sometimes lose their programming when the TV is preset to search for TVs, SATELLITE/CABLE for
you change the batteries. Make sure you keep the manual and
satellite receivers or cable boxes, STREAM for streaming
code lists in a safe place so that you can reprogram the remote if
players, DVD/BLU RAY for DVD and Blu Ray players, and
you need to.
AUDIO/SOUNDBAR for audio devices and soundbars. To
Tip: This remote is already programmed to operate most RCA-
2. program a device key for a different type of device, see the
branded TVs, DVD players, and satellite receivers. Just press the Find the Code List that came with
Changing a Key's Device Type section.
corresponding key—DVD/BLU RAY for a DVD or Blu Ray player, the remote. Locate the section for
TV for a television, SATELLITE/CABLE for a satellite receiver.
the type of device you're trying to
To exit without saving a new code at any point in the Brand
program, and find your brand in
Code Search, press the EXIT key.
Step 1: Install your batteries that section. Circle the codes for
your brand and keep them handy.
1.
Your universal remote requires two AAA alkaline batteries (not Manually turn on the device you
included). want to control.
To install the batteries: 3.
Press and hold the device key you want to program (the
1. Remove the battery compartment cover. POWER key illuminates).
While you're holding down the device key, use your other
2. Insert the batteries, matching the batteries to the (+) and (–) 2.
Find your device's brand in the
marks inside the battery compartment. hand enter the first five-digit code for your brand in the
Brand Code list section of the
code list (the POWER key turns off after the first digit).
3. Push the battery cover back into place.
accompanying code list. Circle
the number for your brand and
Battery Precautions: keep the list handy.
POWER
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
3.
Press and hold the device key you want to program. The
• Always remove old, weak or worn-out batteries promptly and
recycle or dispose of them in accordance with Local and National POWER key illuminates.
Regulations.
While you're holding down the device key, use your other
Battery Saver hand to press and hold the remote's POWER key at the
same time. The POWER key turns off.
Your universal remote control saves battery power by automatically
turning off if any key is pressed for more than 60 seconds. This
saves your battery life should your remote get stuck in a place
where the keys remain depressed, such as between sofa cushions.
POWER
4. Auto Code Search
Wait until the POWER key comes on
and stays on. Then release both keys.
The Auto Code Search goes automatically through all the
POWER POWER
codes for the device you're trying to control. When you find
the one that operates your device, you can stop the search and
store that code.
5.
Look at the numbers you circled for
TIPS: Each device key is associated with a type of device—
your device's brand code number.
the TV is preset to search for TVs, SATELLITE/CABLE for
Press those numbers on the remote
satellite receivers or cable boxes, STREAM for streaming
keypad.
players, DVD/BLU RAY for DVD and Blu Ray players, and
AUDIO/SOUNDBAR for audio devices and soundbars. To
program a device key for a different type of device, see the
Changing a Key's Device Type section.
6.
Point the remote directly at the
To exit without saving a new code at any point in the Auto
front panel of the device you want
Code Search, press the EXIT key.
to control. Press POWER on the
remote and wait 2 seconds. The
remote is testing a single code for 1.
Manually turn on the device you
your device's brand.
want to control.
Did your device turn off?
YES: Press the STOP key to store the code. You're done!
You've programmed this device key.
2.
Press and hold the device key you want to program. The Testing the Code for Maximum
NO: Press POWER again. The remote tests the next code
POWER key illuminates.
Functionality
for your brand.
While you're holding down the device key, use your other
1. Try a variety of the device's functions with the
Keep pressing POWER every 2 seconds until your device hand to press and hold the remote's POWER key at the
turns off. When it does, press STOP. same time. The POWER key turns off.
2. Repeat the Auto Code Search Method from the beginning.
NOTES
POWER
Throughout the programming of each key, be sure to keep
the remote pointed at the IR sensor of the device you are
3. Once the unit turns back on, press the REVERSE key on the
currently programming the remote to control.
Test the remote with the device to make sure the device
key is programmed with the correct code for maximum 3.
Wait until the POWER key comes 4. Test the key's functionality again by attempting to control
functionality. If some features don't work, try a different
on and stays on. Then release
code. See the "Testing the Code for Maximum Functionality" POWER
both keys.
section below for more information.
During the Brand Code Search, the remote ignores
keypresses that aren't part of the search.
4.
The search times out after two minutes (the POWER key Point the remote directly at the
blinks four times and turns off, and the last programmed front panel of the device you Manual Code Search
want to control. Press PLAY on
code under that device key is retained).
The Manual Code Search lets you go one-by-one through all the
the remote and wait 5 seconds.
The POWER key blinks four times and turns off when the codes for the device you're trying to control. When you find the
The remote is testing a batch of
one that operates your device, you can stop the search and store
remote has gone through all the codes. The remote exits the
10 codes on your device.
that code.
Brand Code Search. If your device hasn't turned off yet, try a
different search method.
Did your device turn off?
YES: Go to step 5.
NO: Press PLAY again. The remote tests the next batch of
10 codes.
Testing the Code for Maximum
Functionality Keep pressing PLAY every 5 seconds until your device turns
off.
1. Try a variety of the device's functions with the
remote. If some device features don't work, go to
5.
the next step to try a different code. When your device turns off, press
the REVERSE key on the remote
2. Repeat the Brand Code Search from the beginning. When
and wait at least 2 seconds.
the device turns off for the first time, don't press the STOP
The remote tries the last of the
key, which would store the same code. Instead, with the
previous ten codes.
unit now off, continue to press the POWER key repeatedly
until the unit turns back on. Did your device turn on?
3. Once the unit turns back on, you have found another code YES: Press the STOP key. You're
that operates the device. Press the STOP key. done! You've programmed this
1.
device key.
4. Test the key's functionality again by attempting to control
NO: Press REVERSE again. The remote tests the next
a variety of the device's functions. If the code that has
code in the batch.
been stored controls the majority of the device's functions,
programming is complete. If the code stored does not give
Keep pressing REVERSE every 2 seconds until your device
maximum functionality, try another code.
turns back on. When it does, press STOP.
Note: If you accidentally press the REVERSE key after your
device turns on, press the FORWARD key. Then, wait two
seconds to see if your device turns off again.
2.
NOTES Press and hold the device key you want to program. The
Tour of the Remote
POWER key illuminates
Throughout the programming of each key, be sure to keep
the remote pointed at the IR sensor of the device you are While you're holding down the device key, use your other
currently programming the remote to control. hand to press and hold the remote's POWER key at the In most cases, the keys on
same time. The POWER key turns off. this remote perform the same
Test the remote with the device to make sure the
functions as the keys on your
device key is programmed with the correct code for
original remotes once you've
maximum functionality. If some features don't work, try
programmed this remote to
a different code. See the "Testing the Code for Maximum POWER
operate your components.
Functionality" section below for more information.
Many keys on this remote
have other functions as well.
During the Auto Code Search, the remote ignores
keypresses that aren't part of the search.
Illuminated POWER key
serves as an indicator light to
The search times out after two minutes (the POWER key 3.
Wait until the remote's POWER key provide feedback.
blinks four times and turns off, and the last programmed
comes on and stays on. Then release
POWER
code under that device key is retained). Device keys (TV, SATELLITE/
both keys.
CABLE, DVD/BLU RAY,
The POWER key blinks four times and turns off when the
AUDIO/SOUNDBAR,
remote has gone through all the codes. The remote exits
4. STREAM) put the remote in
the Auto Code Search. If your device hasn't turned off yet, Point the remote directly at the front panel of the device you
the right mode to control your
try a different search method. want to control. Press POWER on the remote and wait 2
device.
seconds. The remote is testing a single code for your device.
The purple keys
Did your device turn off?
(GUIDE•HOME, Arrows, OK
YES: Press the STOP key to store MENU) are the most used
the code. You're done! You've keys for streaming player.
programmed this device key.
remote. If some device features don't work, go to controls Samsung
NO: Press POWER again. The
the next step to try a different code. Hub functionality on TVs.
remote tests the next code for
It may also control similar
your device.
functionality on other devices
When your device turns off, do not stop searching.
Keep pressing POWER every 2 (see your device manual for
Instead, with the unit now off, continue to press the PLAY
seconds until your device turns off. information).
key every 5 seconds until the unit turns back on.
When it does, press STOP.
GUIDE•HOME puts the remote
remote every 2 seconds until your device turns off again. TIP: Because there are so many codes, you may have to press in guide mode for satellite
When your device turns off again, press the STOP key. the POWER key many times—possibly hundreds of times. receivers or cable boxes, and
accesses the home screen for
streaming players.
a variety of the device's functions. If the code that has
NOTES
been stored controls the majority of the device's functions,
EXIT exits remote
programming is complete. If the code stored does not give Throughout the programming of each key, keep the remote
programming; it also
maximum functionality, try another code. pointed at the IR sensor of the device you are programming
performs the same functions
the remote to control.
as on your original remotes.
Test the remote with the device to make sure the device
key is programmed with the correct code for maximum
Arrow keys act as navigation
functionality. If some features don't work, try a different
keys in device guides and
code. See the "Testing the Code for Maximum Functionality" menu systems.
section below for more information.
The INPUT•SOURCE — (dash)
During the Manual Code Search, the remote ignores
key has three functions: (1) it
keypresses that aren't part of the search.
toggles through all the video
TIPS: The Manual Code Search method may take a long time
The search times out after two minutes (the POWER key
sources connected to your TV;
because the remote searches through all of the codes in
blinks four times and turns off, and the last programmed
(2) when the remote is in VCR
its memory one-by-one. If your brand is listed in the Brand code under that device key is retained).
mode, this button toggles
Codes or the Code Lists, first try the Brand Code Search or
The POWER key blinks four times and turns off when the
between VCR and the TV input; (3) when you're entering digital
the Direct Code Entry method.
remote has gone through all the codes. The remote exits the
channel numbers directly, this button lets you separate the
Brand Code Search. If your device hasn't turned off yet, try a
Each device key is associated with a type of device—the TV main channel number from the sub-channel number (such as
different search method.
is preset to search for TVs, SATELLITE/CABLE for satellite 59.1).
receivers or cable boxes, STREAM for streaming players,
Red, green, yellow, and blue keys access additional features
DVD/BLU RAY for DVD and Blu Ray players, and AUDIO/
Testing the Code for Maximum Functionality
on your cable box, satellite receiver, or Blu-ray disc player (see
SOUNDBAR for audio devices and soundbars. To program a
1. Try a variety of the device's functions with the
your device manual for details).
device key for a different type of device, see the Changing a
remote. If some features of your devices don't work,
Key's Device Type section.
go to the next step to try a different code.
IMPORTANT
To exit without saving a new code at any point in the Manual
2. Repeat the Manual Code Search and Entry Method from
Code Search, press the EXIT key.
the beginning. When the device turns off for the first time, Because this remote controls more than one device, you
don't press the STOP key, which would store the same
must first "tell" the remote which device you wish to
code. Instead, with the unit now off, continue to press the
operate. That means, if you wish to operate your TV, you
Manually turn on the device you POWER key repeatedly until the unit turns back on.
must first press the TV key to put the remote in the TV
want to control.
3. Once the unit turns back on, you have found another code Mode. The remote stays in that device mode until you press
that operates the device. Press the STOP key.
a different device key. For example, if your remote is in TV
4. Test the key's functionality again by trying a variety of Mode and you want to operate the DVD or Blu Ray player,
functions. If the code controls the majority of the device's you must press the DVD/BLU RAY key to change device
functions, programming is complete. If the code stored modes.
does not give maximum functionality, try another code.
Channel Lock
Advanced Functions
Channel lock automatically sends channel commands, like the
CH, GO BACK, and 0–9 number keys, to your satellite receiver,
cable box, or digital TV converter when you're in TV mode.
Changing A Key's Device Type
This can save you keypresses if you use a device other than
your TV to change channels.
Each device key is associated with a type of device—the TV is
To turn channel lock on:
preset to search for TVs, SATELLITE/CABLE for satellite receivers
or cable boxes, STREAM for streaming players, DVD/BLU RAY 1. Press and hold the device key for the device you use to
for DVD and Blu Ray players, and AUDIO/SOUNDBAR for audio change channels. While you're holding down this device
devices and soundbars. To program these keys to control a key, use your other hand to press and hold the remote's
different kind of device, you have to reassign them first. CH up key at the same time.
2. Wait until the remote's POWER key comes on and stays on.
Reassigning the DVD/BLU RAY Key to Control a VCR
Then release both keys.
The DVD/BLU RAY key defaults to control a DVD or Blu Ray
player. If you want the DVD/BLU RAY key to control a VCR, you 3. Press ENTER to lock channel commands to this device.
must reassign it.
To turn channel lock off:
1. Press and hold the DVD/BLU RAY key. The POWER key
1. Press and hold the TV key. While you're holding down the
illuminates. Keep holding down the DVD/BLU RAY key.
TV key, use your other hand to press and hold the remote's
2. While holding down the DVD/BLU RAY key, press and CH down key at the same time.
release the number 2 key on the keypad. The POWER key
2. Wait until the remote's POWER key comes on and stays on.
turns off.
Then release both keys.
3. Release the DVD/BLU RAY key. The POWER key blinks two
3. Press ENTER to start changing channels with your TV.
times and then turns off. The DVD/BLU RAY key is now set to
control a VCR.
4. Follow the directions in the auto, brand, direct entry, or manual
code search to program the DVD/BLU RAY key for your VCR.
Code Retrieval
Reassigning the AUDIO/SOUNDBAR Key To Control
Once you've programmed the remote to control your devices,
Other Devices you may want to record the codes for future reference. If you
The AUDIO/SOUNDBAR key defaults to control an audio device used the Direct Code Entry method, this is easy. Just find
or soundbar. If you want the AUDIO/SOUNDBAR key to control the codes you entered and make a note of them in the boxes
a different device (an additional TV, DVD, satellite or cable box, below. If you used one of the Code Search methods to program
for example), you must reassign it. your remote or if you used the Direct Entry method but don't
remember the code, you will need to retrieve each device's
1. Press and hold the AUDIO/SOUNDBAR key. The POWER key
five-digit code. Retrieving the actual code and writing it down
turns on.
will save you time if you ever need to program the remote
2. While holding down the AUDIO/SOUNDBAR key, press and
again. If the codes are recorded, you can use the Direct Entry
release the number key on the keypad for the device you
method to reprogram your remote to control your devices,
wish to control (see the chart below). The POWER key turns
which is quick and easy.
off.
1. Press and hold the device key (TV,
AUDIO/SOUNDBAR KEY CONTROLS: SATELLITE/CABLE, DVD/BLU RAY,
AUDIO/SOUNDBAR, STREAM)
Additional TV press 1 POWER
whose code you wish to retrieve.
VCR or DVR press 2 The POWER key illuminates. Keep
pressing the device key.
Additional DVD or Blu Ray press 3
Audio device or soundbar press 4 2. While holding the device key down, press and hold the
INFO key. The POWER key turns off. After holding down
Additional satellite, cable box or press 5
both keys for three seconds, the POWER key turns back on.
Actual model may vary from streaming player
illustration 3. Release both keys. The POWER key remains on.
3. Release the AUDIO/SOUNDBAR key. The POWER key blinks 4. Starting with the number 1 key, press and release each
two times and then turns off. The AUDIO/SOUNDBAR key is
number key on the keypad in the following order: 1-9, then
now set to control the device type you selected. 0. The number that causes the POWER key to blink is the
first number of the code. As you find each number of the
4. Follow the directions in the auto, brand, direct entry, or
code, write it down for future reference.
manual code search to program the AUDIO/SOUNDBAR key.
Note: All TV codes begin with the number 1; all VCR and DVR
Volume Punch-Through codes begin with the number 2; all DVDs, the number 3; all
audio devices, the number 4; and all satellite receivers, cable
Volume punch-through allows the VOL and MUTE keys, when
boxes, streaming players and DTV converters, the number 5.
pressed in SATELLITE/CABLE, DVD/BLU RAY, or STREAM
modes, to "punch through" to TV or AUDIO/SOUNDBAR. 5. Repeat step 4 until you have retrieved all five numbers in
Volume punch-through occurs automatically and allows you the code. After the fifth number is retrieved, the POWER
to control the volume without exiting the current mode. (If key blinks briefly, then turns off.
the DVD/BLU RAY key has been programmed with a TV code,
TIP: To exit the Code Retrieval Mode at any time, press the
volume can punch through to this device as well.)
EXIT key.
Notes: Volume punch-through does not occur in cases where
Note: If you press an invalid key during the Code Retrieval
the component code has its own volume/mute controls, such
process, the remote will not respond. If you do not press
as some satellite receivers.
a valid Code Retrieval key (TV, SATELLITE/CABLE, DVD/
Volume punch-through sends volume commands to the last BLU RAY, AUDIO/SOUNDBAR, STREAM, INFO, EXIT), Code
device you were controlling, either TV or AUDIO/SOUNDBAR,
Retrieval times out after 15 seconds. The POWER key blinks
before the active device. For example, if you were controlling
four times, and then turns off.
the TV before you started controlling your DVD or Blu Ray
player, the volume commands will "punch through" to the TV
while you're in DVD/BLU RAY mode.
TV CODE SATELLITE/CABLE CODE Problem: The POWER key does not light when you press a key.
• You may have pressed an invalid key for the mode the remote is in.
1 5 • Make sure the remote is in the correct mode by pressing the
corresponding device key (TV, SATELLITE/CABLE, DVD/BLU
RAY, AUDIO/SOUNDBAR, STREAM). This tells the remote which
device to operate.
SAT CABLE STREAMING PLAYER
• Make sure the batteries are fresh and are properly installed.
Replace the batteries with two new AAA batteries, if necessary
DVD/BLU RAY CODE AUDIO/SOUNDBAR CODE
(see the Battery Installation section).
Problem: The remote will not change channels on device.
• Make sure the remote is in the correct mode by pressing the
corresponding device key (TV, SATELLITE/CABLE, DVD/BLU
DVD BLU RAY VCR
AUDIO RECEIVER SOUNDBAR RAY, AUDIO/SOUNDBAR, STREAM). This tells the remote which
device to operate.
STREAM CODE • Press the ENTER key after you enter a channel number.
• Remove any obstacles between the remote and the device. Make
sure to aim the remote at the IR sensor on the device.
Problem: The device's menu does not appear on the TV screen.
• Make sure you have connected the device to your TV properly and
selected the correct input. (See your devices' Owner's Manuals for
proper connection procedures.)
• Make sure the remote is in the correct mode by pressing the
Troubleshooting corresponding device key (TV, SATELLITE/CABLE, DVD/BLU
RAY, AUDIO/SOUNDBAR, STREAM). This tells the remote which
device to operate.
• Menu access isn't supported for all brands. You may need to use
Problem: The remote does not operate your device.
your original remote control to access menu functions for some
• Make sure the remote is in the correct mode by pressing the
devices.
corresponding device key (TV, SATELLITE/CABLE, DVD/BLU
For more information, please visit www.RCAAudioVideo.com
RAY, AUDIO/SOUNDBAR, STREAM). This tells the remote which
device to operate.
Consumer Help Line: 1-800-420-7968
• Remove any obstacles between the remote and the device. Make
sure you're aiming the remote at the device's IR sensor. Care and Maintenance
• Make sure the batteries are fresh and are properly installed. • Keep the remote dry. If it gets wet, wipe it dry immediately.
Replace the batteries with two new AAA batteries, if necessary • Use and store the remote only in normal temperature environments.
(see the Battery Installation section).
• Handle the remote gently and carefully. Don't drop it.
• Keep the remote away from dust and dirt.
Problem: The remote can't be programmed to operate your
• Wipe the remote with a damp cloth occasionally to keep it looking new.
device.
• Modifying or tampering with the remote's internal devices can cause
• If you are testing the remote while programming it, you may be malfunction and invalidate its warranty.
too far away from the device or at a wrong angle. There must be
an unobstructed path between the remote and the IR sensor on
the device. Move closer and make sure you point the remote at the Limited Lifetime Warranty
device you're trying to control.
• If you're using the Direct Entry programming method to enter
Voxx Accessories Corporation (the "Company") warrants to you the
the codes for your brand and the unit is still not functioning
original retail purchaser of this product that should it, under normal use
properly, try the auto, brand, or manual search method. and conditions, be proven defective in material or workmanship during its
• To control combo units, like TV/VCRs or TV/DVDs, you must lifetime while you own it, such defect(s) will be repaired or replaced (at the
Company's option) without charge for parts and repair labor.
program the individual corresponding device keys to control
To obtain repair or replacement within the terms of the warranty, the product
each part of the combo unit. Once programmed successfully,
is to be delivered with proof of warranty coverage (e.g. dated bill of sale),
the TV key controls the TV functions, and the DVD/BLU RAY key
specification of defect(s), transportation prepaid, to an approved warranty
controls the DVD or Blu Ray functions.
station. For the location of the nearest warranty station to you, call toll-free to
• Make sure the batteries are fresh and are properly installed. our control office: 1-800-645-4994.
This Warranty does not cover product purchased, serviced or used outside
Problem: The remote doesn't perform commands properly. the United States or Canada. This Warranty is not transferable and does
• Make sure the remote is in the correct mode by pressing the not extend to costs incurred for installation, removal or reinstallation of
the product. This Warranty does not apply if in the Company's opinion,
corresponding device key (TV, SATELLITE/CABLE, DVD/BLU
the product has been damaged through alteration, improper installation,
RAY, AUDIO/SOUNDBAR, STREAM). This tells the remote which
mishandling, misuse, neglect, accident, or the simultaneous use of different
device to operate. battery types (e.g. alkaline, standard or rechargeable).
• Make sure device is ready (for example, the DVD or Blu Ray THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS
player has a disc loaded). LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE
• You may have pressed an invalid key for the mode the remote is in.
PAID BY PURCHASER FOR THE PRODUCT.
• If you're trying to enter a channel number directly, try pressing
This Warranty is in lieu of all other express warranties or liabilities. ANY
the ENTER key after entering the channel number as this is a
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
requirement of certain models and brands. MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL
• There is a possibility that a programmed code may only be BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL
THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
able to control some of your device features (for example, only
DAMAGES WHATSOEVER. No person or representative is authorized
turns a device on and off). To confirm that the device key is
to assume for the Company any liability other than expressed herein in
programmed with the correct code for maximum functionality,
connection with the sale of this product.
test the device. Attempt to control a variety of the device's
Some states/provinces do not allow limitations on how long an implied
functions with the remote. If some of the features of your
warranty lasts or the exclusion or limitation of incidental or consequential
devices don't work, try programming the remote with a different damage so the above limitations or exclusions may not apply to you. This
code in the list using the Direct Code Entry Method, until you
Warranty gives you specific legal rights and you may also have other rights,
find the code that allows the remote to control the majority of which vary from state/province to state/province.
your device's functions. Different codes can provide different
levels of functionality. ©2016 Voxx Accessories Corporation
Trademark(s) ® Registered