Specifications - Sanyo HT27547 Owner's Manual

SCREEN SIZE:
SCANNING FORMAT:
RF ANTENNA INPUT:
POWER REQUIREMENT:
POWER CONSUMPTION:
SOUND:
AMPLIFIER:
JACKS / CONNECTORS:
VIDEO1
VIDEO2
VIDEO2
Digital Audio Output:
Analog Audio Output:
SIZE AND WEIGHT (APPROXIMATELY):
Horizontal Dim. (Width):
Vertical Dim. (Height):
Depth Dim. (Thickness):
Weight:
Specifications are subject to change without notice.
CAUTION: FCC Regulations state that improper modifications or un-
authorized changes to this unit may void the user's authority
to operate the unit.

SPECIFICATIONS

27" Flat Screen
480i (All Signals are
Converted to 480i)
75 ohm—Digital/Analog
Source: AC 120V, 60Hz
85 Watts (Average)
Two Speakers, size: 6 x 12 cm
Built-in with 1.0 W/ch
Front Composite Video and
Audio R/L
Rear Composite Video with
Audio R/L Input
S-Video
Component (Y/ Pb / Pr) with
shared Audio R/L Input
®
Dolby Digital (Optical Cable)
Fixed Audio R/L
30.3 in. (770mm)
23.0 in. (585mm)
19.5 in. (496mm)
103.5 (lbs.) 47.0 (Kg)
Trademarks Information:
Manufactured under license from Dolby
®
Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories.
with a double "Z" is a registered trademark of
Sanyo Manufacturing Corporation.
This symbol on the nameplate means the product is
Listed by Underwriters' Laboratories Inc. It is designed
and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty and electrical hazards.
"As an E
Manufacturing Corporation has determined
that this product meets the E
guidelines for energy efficiency."
®
R
MediaStack-ATSC the DTV software embedded in this product
copyright (c) 2004 by Zentek Technology, Inc. All rights reserved.
® Partner, Sanyo
S
NERGY TAR
S
NERGY TAR
®
7