Advertisement
LENS REPLACEMENT PROCEDURE (FOR "A" TYPE )
Perform the steps
First set the lens at the center position with lens
shift adjustment.
1
REMOVE THE LENS COVER AND LIGHT-
BLOCK SHEET (See Figure-1 and 2)
Remove 2 screws-A.
1.
Press the button (or remove 2 screws-B) on
2.
the lower of the lens cover and remove the
lens cover.
Remove the light-block sheet from the light-
3.
block sheet base.
2
REMOVE THE LIGHT-BLOCK SHEET BASE
(See Figure-3 and 4)
1.
Slide the light-block sheet base upward.
Remove the light-block sheet base.
2.
LENS MOTOR PARTS NO.
(LOCATED ON THE LENS)
to
for lens replacement.
6
1
LIGHT-BLOCK
SHEET BASE
LENS COVER
SCREW "B" (Some models)
LIGHT-BLOCK
SHEET BASE
-2-
SCREW "A"
BUTTON
LIGHT-BLOCK SHEET
LIGHT-BLOCK
SHEET BASE
Fig-1
Fig-2
Fig-3
Fig-4
Advertisement
