D-Link DWL-650 Quick Install Manual page 2

2 2
Installing the Drivers Installing the Drivers
Then the "Software License
Agreement" will be displayed.
Click Yes to accept.
The next screen will prompt for the
System ID. The word "default" will
be displayed in the text box.
Type in the desired name of the System ID in
the provided text box. The System ID needs to
be the same for all wireless network devices.
Click Next.
Select the Network Mode.
If you are connecting to an Access Point,
select "Infrastructure". Otherwise, if you
are connecting directly to another wireless
adapter without an Access Point, or Wireless
Residential Gateway, then select "Ad Hoc".
Click Next.
Windows will prompt for the destination folder.
Click Next to accept the selected folder.
Otherwise, click Browse and select the
desired folder.
Rev. dwl650me-12-7-00, 11am
continued continued
2 2
Installing the Drivers Installing the Drivers
The next screen will appear.
Click Next.
Windows will then load the system files. After
the system files are loaded, Windows will
prompt to restart the computer.
Finish.
Click
3 3
Installing DWL-650 Installing DWL-650
Wireless PC CARD Wireless PC CARD
If the following prompt appears after the
computer is restarted,
Click OK to continue.
Then insert the DWL-650 Wireless PC Adapter into
an available PC slot in the laptop.
4 4
Finish Installation Finish Installation
Windows will recognize the DWL-650 Wireless PC Adapter.
If prompted for driver files please refer to Appendix A.
(Note that some computers may require a reboot.)
To check that the wireless adapter is working, click on the
configuration utility icon in the task bar. Make sure that there is a
wireless connection under the "link info tab".
Rev. dwl650me-12-5-00, 1:37pm
continued continued