Sanyo LNS-T01Z Replacement /Installation Instructions page 2

Sanyo lcd projector lens replacement and installation procedures

NOTES ON LENS INSTALLATION

The ZOOM and FOCUS adjustment on the Top Control or the Remote Control can-

not be operated with this Lens.

• Lens installation and replacement should be made by the qualified service per-

sonnel.

• Be sure to install the lens following this procedure precisely.

• The lens cover is on the lens for protection. Be sure to replace the lens cover

before installation.

• When installing or replacing the lens, be careful not to stain, scratch or damage

the lens.

LIST OF CONTENTS

Following parts are included in the packing.

• LENS

• LENS MOUNTING SCREWS

• DRIVER

• LIGHT-BLOCK SHEET

BE SURE TO CHECK FOR SAFETY

After installing or replacing the lens, be sure to check the following for safety.

1. Check the lens is securely fixed by 4 screws.

2. Check no wiring is tangled on the gear of lens motor or the other mechanical

parts.

3. Check no part is missing, or no mounting part is loose.

Some parts are not used for installation or replacement. Keep these parts for later use.

Note : Figures in this manual may be differ from the actual product.

1 pc.

2 pcs. (for spare)

1 pc.

Lns-w01z