Advertisement
Requests and cautions regarding this watch
• Make sure to adequately wind the mainspring before setting the time (hour and
minute hands).
• If the time is set without the mainspring being adequately wound, the second
hand will oscillate back and forth 2-3 seconds.
There are two ways to wind the mainspring: winding by turning the crown to
the right by hand, and for the automatic winding watch, winding by shaking
the watch gently. The second hand may rarely oscillate back and forth if the
mainspring has been wound by shaking the watch to the side with excessive force.
However, this has no effect on the functions or performance of the watch.
Characteristics of Mechanical watches
7
Advertisement
