Advertisement
For Enclosed Dust Covers
The FluxBeam CORE LED heatsink requires open
air flow to prevent early burnout.
If your light housing has an enclosed dust cover, you
will need to drill several small holes or one 4.5 cm
hole into the dust cover before reapplying. This
allows for proper ventilation and ensures the longest
possible bulb life.
TROUBLESHOOTING
Plug Does Not Fit
Make sure you have the bulb plug adapter installed.
Neither Side Turns On
Disconnect the plug adapter from the vehicle power harness
Flip the plug adapter 180° and re-connect.
For H11, you will need to file down the plastic tab located between the prongs in order to
re-connect flipped.
One Side Does Not Work
Visit our knowledge base for further assistance.
https://goo.gl/QT9yC7 (URL is case-sensitive)
Pre-Drilled Cover
Enclosed Dust Cover
.
flip 180 degrees
Q U IC K S T A RT G U ID E
PACKAGE
CONTENTS
ALL KITS INCLUDE
Product
Accessories
a
b
LED Driver
d1
x2
LED Bulb
Legal Disclaimer :
Install at your own risk. OPT7 and its affiliates are not liable for any damages, costs,
or injury as a result of install or use.
TIPM WARNING:
Resistors get VERY HOT. Must be mounted on non-moving metal. Keep away
from wires and plastic. Do not touch during use.
c
H7 H1 H3 5202
All Other Sizes
x2
x2
Required Bulb Plug Adapters
d2
H4
v1.0 011018
Advertisement
Table of Contents
Related Manuals for OPT-7 FluxBeam CORE
Summary of Contents for OPT-7 FluxBeam CORE
- Page 1 For Enclosed Dust Covers Q U IC K S T A RT G U ID E The FluxBeam CORE LED heatsink requires open air flow to prevent early burnout. Pre-Drilled Cover If your light housing has an enclosed dust cover, you will need to drill several small holes or one 4.5 cm...
- Page 2 Connecting and Testing counter-clockwise until it unlocks. FluxBeam CORE was developed as a universal product, meaning it was designed to fit the majority of vehicles but not a specific vehicle. Since most vehicles are not wired the same way, we include accessories and a list of various setup option to increase the chance of a successful install.
Need help?
Do you have a question about the FluxBeam CORE and is the answer not in the manual?
Questions and answers