Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Studio Technologies Manuals
  4. Accessories
  5. Dante 5330
  6. User manual

Studio Technologies Dante 5330 User Manual

Flex-use
Hide thumbs

Advertisement

Quick Links

Download this manual
Model 5330 Flex-Use
Dante
Audio Interface
®
User Guide
Issue 1, July 2018
This User Guide is applicable for serial numbers
M5330-02001 and later with application firmware 1.0 and later
and Dante firmware 4.2.0 (UltimoX4 4.1.2.1)
Also applicable for serial numbers
M5330-00151 to 02000 with application firmware 1.0 and later
and Dante firmware 2.5.0 (Ultimo 4.0.9.1)
Copyright © 2018 by Studio Technologies, Inc., all rights reserved
www.studio-tech.com
50602-0718, Issue 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Dante 5330 and is the answer not in the manual?

Questions and answers

Related Manuals for Studio Technologies Dante 5330

Summary of Contents for Studio Technologies Dante 5330

  • Page 1 Dante firmware 4.2.0 (UltimoX4 4.1.2.1) Also applicable for serial numbers M5330-00151 to 02000 with application firmware 1.0 and later and Dante firmware 2.5.0 (Ultimo 4.0.9.1) Copyright © 2018 by Studio Technologies, Inc., all rights reserved www.studio-tech.com 50602-0718, Issue 1...
  • Page 2 This page intentionally left blank.

  • Page 3: Table Of Contents

    Table of Contents Revision History ..............4 Introduction ................5 Installation ................9 Configuration ................ 12 Operation ................13 Technical Notes ..............18 Specifications ............... 22 Model 5330 User Guide Issue 1, July 2018 Studio Technologies, Inc. Page 3...

  • Page 4: Revision History

    Revision History Issue 1, July 2018: 1. Initial release. Issue 1, July 2018 Model 5330 User Guide Page 4 Studio Technologies, Inc.

  • Page 5: Introduction

    A 2-channel (stereo) headphone output level of the source. Two additional inputs are allows connection of headphones or ear Figure 1. Model 5330 front view Figure 2. Model 5330 back view Model 5330 User Guide Issue 1, July 2018 Studio Technologies, Inc. Page 5...
  • Page 6 (DDM) software application. For serial fect complement for academic, industrial, numbers 02001 and later, the unit is also or corporate audio-visual facilities where a compliant with AES67 digital audio signals. Issue 1, July 2018 Model 5330 User Guide Page 6 Studio Technologies, Inc.
  • Page 7 Dante input (receiver) channels. Two push- audio consoles, wireless microphone re- button switches and four LEDs, located ceivers, and video playback equipment. on the front panel, allow for simple source selection. Model 5330 User Guide Issue 1, July 2018 Studio Technologies, Inc. Page 7...
  • Page 8 Ethernet connection, ear buds. For convenience both 3.5 mm helping to ensure that its Dante capabilities and ¼-inch 3-conductor (stereo) phone remain up to date. Issue 1, July 2018 Model 5330 User Guide Page 8 Studio Technologies, Inc.

  • Page 9: Installation

    But that can be overcome by using a fiber-optic interconnection between the Model 5330-related Ethernet switch and the other Ethernet switches in the related local- Figure 3. Ethernet connection (back panel) Model 5330 User Guide Issue 1, July 2018 Studio Technologies, Inc. Page 9...
  • Page 10 The seven outputs consist of main outputs 1-4, the auxiliary output, and monitor out- Figure 4. Inputs 1 and 2 (front panel) puts 1 and 2. Issue 1, July 2018 Model 5330 User Guide Page 10 Studio Technologies, Inc.
  • Page 11 Model 5330’s back panel, are provid- ed for interfacing main outputs 1-4 and Figure 6. Main outputs 1-4, auxiliary output, and monitor outputs (back panel) Model 5330 User Guide Issue 1, July 2018 Studio Technologies, Inc. Page 11...

  • Page 12: Configuration

    The Model 5330 uses an Ultimo 4-input/4-output integrated circuit to imple- ment Dante networking. Figure 7. AC mains input (back panel) Issue 1, July 2018 Model 5330 User Guide Page 12 Studio Technologies, Inc.

  • Page 13: Operation

    AC mains power is con- interface is compliant with AES67. nected. As an integrity check all the LEDs located on the unit’s front panel will light Model 5330 User Guide Issue 1, July 2018 Studio Technologies, Inc. Page 13...
  • Page 14 flash green. After a the Model 5330’s back panel. The LINK few seconds the identification patterns will LED will light amber whenever an active cease and normal Model 5330 operation Issue 1, July 2018 Model 5330 User Guide Page 14 Studio Technologies, Inc.
  • Page 15 –40 dBFS; 20 dB less than the –20 dBFS the Dante output (transmitter) is getting quite nominal. A signal present/peak LED will close to digital maximum. light red when its associated signal level is Model 5330 User Guide Issue 1, July 2018 Studio Technologies, Inc. Page 15...
  • Page 16 A Dante source signal with a level of –20 dBFS will always result in a +4 dBu Figure 9. Auxiliary output (front panel) analog signal level on its associated output. Issue 1, July 2018 Model 5330 User Guide Page 16 Studio Technologies, Inc.
  • Page 17 (stereo) headphone output is accessible which in turn adjusts the signal levels within on the front panel by way of 3-conductor Figure 10. Monitor section (front panel) Model 5330 User Guide Issue 1, July 2018 Studio Technologies, Inc. Page 17...

  • Page 18: Technical Notes

    Private IP Addressing (APIPA). It is also ing the source from output 1 to output 4. sometimes referred to as auto-IP. Link-local Issue 1, July 2018 Model 5330 User Guide Page 18 Studio Technologies, Inc.
  • Page 19 ARP command the tions of EEE can incorrectly interpret that a required “clues” can be obtained. connected Dante device is not present and prevent proper Dante operation. Model 5330 User Guide Issue 1, July 2018 Studio Technologies, Inc. Page 19...
  • Page 20 firmware version num- released to add features or correct issues. ber. Knowing the version number can be Refer to the Studio Technologies’ website useful when working with factory personnel for the latest application firmware file. The on application support and troubleshooting unit has the ability to automatically load situations.
  • Page 21 But to be conservative, much simpler method of keeping the Ultimo remove AC mains power first and then firmware current. remove the USB flash drive. Model 5330 User Guide Issue 1, July 2018 Studio Technologies, Inc. Page 21...

  • Page 22: Specifications

    Impedance: 20 k ohms, nominal Nominal Level: +4 dBu (results in Dante output level of –20 dBFS) Maximum Level: +24 dBu (results in Dante output level of 0 dBFS) Issue 1, July 2018 Model 5330 User Guide Page 22 Studio Technologies, Inc.
  • Page 23 Mounting: one space (1U) in a standard 19-inch rack Weight: 3.3 pounds (1.5kg) Specifications and information contained in this User Guide subject to change without notice. Model 5330 User Guide Issue 1, July 2018 Studio Technologies, Inc. Page 23...