Ikelite 6280.30 Supplemental Instructions page 3

L27 Initial Camera Settings
- Press the
Easy Auto or Scene Modes.
- Set Flash to
Preset the following functions in the
- Set Image Mode to "16m."
- Set White Balance to "Auto."
- Set Continuous to "S" Single.
- Set Color Options to V1 "Vivid Color."
Preset the following functions in the
- Set Autofocus Mode to "AF-S."
Preset the following functions in the
- Set Time Zone and Date.
- Set Electronic VR to "Auto.
- If offered, set AF assist to "OFF." A strobe focusing light is
recommended to assist AF underwater.
- Set Auto off to "5m" and Sleep mode to "OFF."
- Insert and format a SD or SDHC memory card.
For more accurate colors, we recommend setting manual white balance
underwater using a white slate or white sandy bottom. Manual white
balance should be reset for each working depth due to color absorption
caused by the water. When adding a UR-Pro color filter, reset manual
white balance.
Note: Enable Macro
overexposure occurs, back away from the subject and zoom in. If
overexposure continues, use "-" exposure compensation.
button and set the shooting mode to
"Fill Flash."
mode when shooting close-up subjects. If
(before placing camera in housing)
Menu Settings:
Menu Settings:
Menu Settings:
Auto Mode, not
3