Advertisement
Chapter 3 Setting up the LCI
The LCI features a 4-digit red LED display, four programming keys and two function keys.
On 'Power Up', the display will show either 'good' or display an error code e.g. '1Er5' which, in this case,
would refer to Load Cell 1 with error condition 5.
Sequence of Operations
Programmer Keys
1
Used to scroll through and change the set-up data by displaying
mnemonics for each configurable parameter followed by the appropriate
data and stores the data in non-volatile memory.
Selects the display digit to be modified. Selection is indicated by a
2
flashing digit.
Increments each selected display digit 0-9, or –9 to +9 for the most
3
significant digit depending on whether the '-' sign is illuminated or not.
4
Saves the current value into non-volatile memory, exits the menu and
resets the display to showing 'good' or an error display.
If, during the programming sequence, setting or interrogation is not
completed, the display will revert to the status message after 2 minutes.
Password Protection
A 4 digit password number must be entered. The number is accessed when 'PASS' is displayed. At this
point, it is necessary to enter the factory-set number (1111).
4
Mantracourt Electronics Limited LC1 User Manual
Advertisement
