Lorell 44552 Operating Instructions

2 SPEED 6" CLIP FAN
Model: 44552

Operating Instructions

CAUTION
Read Rules for Safe Operation and Instructions Carefully.
WARNING
If the power cord is damaged, it is strongly recommended that you contact a
qualified electrician for repairs.
RULES FOR SAFE OPERATION
1. Never insert fingers, pencils or any other object through the guard when
fan is running.
2. Disconnect fan when moving from one location to another.
3. Disconnect fan when removing guards for cleaning.
4. Be sure fan is clipped onto correct place as indicated in
clipping instruction below.
5. DO NOT use fan in window. Rain may create electrical
hazard.

ASSEMBLY INSTRUCTIONS

Attach the Motor assembly to the angle-adjusting joint of the clip
with the butterfly head screw and nut.
OPERATING INSTRUCTIONS
Fan speed is controlled by the rotary switch
(OFF – LOW – HI) 0 – 1 – 2.
1. The airflow can be adjusted upward or downward by
loosening the angle-adjusting joint. Retighten knob securely.
2. The direction of airflow can be adjusted by turning the rotary
joint.
3. Plug the power supply cord into a wall outlet.
CLIPPING INSTRUCTIONS
1. Place the clip onto a secure structure. The clip can accommodate
a 3/4" to 1-1/8" thick structure.
2. Fig.1 through Fig.3 illustrate the wrong way to clip to a structure and
the wrong kind of structures to clip onto. Clip as shown to reduce the
risk of damage.
(Read and Save These Instructions)