Sony PlayStation VR Instruction Manual page 7

Moisture condensation
ˎ Do not expose the system to rain or moisture.
ˎ Do not place a container filled with liquids on top of the
processor unit.
ˎ If PS VR is brought directly from a cold location to a warm
one, moisture may condense inside the VR headset and the
processor unit. Should this occur, the product may not
operate properly. In this case, turn off the VR headset and
unplug the AC power cord from the electrical outlet. Do not
use the product until the moisture evaporates (this may
take several hours). If the product still does not operate
properly, visit our website (
Unusual or unresponsive behaviour
Press the (power) button (
at least 7 seconds to force a shutdown, and then turn on the
headset again. If the problem persists, restart the PS4™ system.
High temperature message
ˎ If the processor unit's internal temperature becomes
elevated, a message will be displayed. In this case, turn off
the PS4™ system and leave it unused for a while. After the
processor unit cools down, move it to a location with good
ventilation, and then resume use.
ˎ Do not block the processor unit's vents, and do not use the
product in a closed cabinet or other locations where heat
may build up.
back cover).
page 11) on the VR headset for
AC adaptor and AC power cord use
ˎ Use an electricity supply that is easily accessible, so the AC
power cord can be unplugged quickly if the need arises.
Stop use, unplug the AC power cord from the electricity
supply and disconnect any other cables immediately if the
product functions in an abnormal manner, produces
unusual sounds or smells or becomes too hot to touch.
ˎ Unplug the AC power cord from the electricity supply when
the status indicator on the processor unit is red. Unplugging
the cord while the indicator is white or flashing red may
cause a malfunction.
ˎ Do not use an AC adaptor or AC power cord other than
those supplied with the product. The supplied AC adaptor
and AC power cord are designed exclusively for use with
this product. They cannot be used with other products. In
addition, other AC adaptors or AC power cords cannot be
used with this product. Failure to follow these precautions
may cause the product to overheat and may lead to fire or
electric shock.
ˋ Do not plug the AC power cord for the product into an
electricity supply until you have connected the
HDMI™cables.
ˋ Do not touch the plug of the AC power cord with wet
hands.
ˋ Do not use the AC adaptor when it is covered by a cloth,
as it may overheat, causing fire or malfunction.
ˋ Unplug the AC power cord from the electricity supply
before cleaning or when you do not intend to use the
product for an extended period of time.
ˋ Do not connect the AC power cord to a voltage
transformer or inverter.
EN
7