Troubleshooting; Environmental Protection - McGREGOR MCT1825 Original Instruction Manual

Troubleshooting

General troubleshooting
The following chart lists problem symptoms, possible causes and corrective action, if your electric
grass trimmer does not operate properly. If these do not identify and correct the problem, contact
your helpline.
WARNING:
product cool down before performing inspection, maintenance and cleaning work!
Problem
Grass trimmer
does
not operate
Grass trimmer
operates
intermittently
Grass trimmer
labours
Grass trimmer is
not cutting
Line will not feed
from spool
Line keeps
breaking

Environmental protection

This product has been marked with a symbol relating to removing electric and electronic waste. This
means that this product shall not be discarded with household waste but that it shall be returned to
a collection system which conforms to the European Directive 2002/96/CE. It will then be recycled
or dismantled in order to reduce the impact on the environment. Electric and electronic equipment can be
hazardous for the environment and for human health since they contain hazardous substances.
22
Always switch the product off, disconnect it from power supply and let the
Possible cause
1.1 No power
1.2 Replace with DC possible
cause & corrective action
2.1 Extension cord
damaged
2.2 Internal wiring
damaged
3. Grass too high
4 Line too short/broken off
5.1 Spool empty
5.2 Line inside the spool
entangled
6.1 Line inside the spool
entangled
6.2 Trimmer used
incorrectly
Customer helpline 0345 605 2065
Solution
1.1 Check power
1.2 Check other socket, replace
2.1 Check cord, replace
2.2 Contact Service Agent
3. Cut in stages
4 Feed the line manually/automatically
5.1 Replace the spool
5.2 Inspect the spool, rewind if
necessary
6.1 Inspect the spool, rewind if
necessary
6.2 Only trim with the tip of the line,
avoid stones, walls and other hard
objects.
Feed the line regularly to maintain full
cutting width.