UTICA BOILERS TriFire Assembly & Instruction Manual

This assembly must be completed by a qualified installer or service agency, in accordance with the
manufacturer's instructions, and in accordance with all codes and requirements of the authority having
jurisdiction. Failure to follow these instructions could result in fire or explosion resulting in property dam-

Knockdown Boiler Assembly Instructions -

TriFire Model
1. Remove all components from crate. It may be to the
installer's advantage to place the cast iron boiler block
close to where the final installation location will be.
2. Install rubber grommets in rear top plate. Attach with
brass bolts and washers. See
Figure 1
Rear of boiler
KNOCKDOWN ASSEMBLY
Instructions for
TriFire Oil Fired Boiler
!
age, personal injury, or loss of life.
Figure 1.
WARNING
3. Wrap insulation around boiler with the smooth side out.
If necessary, overlap underneath boiler. Wrap 2 band-
ing strips around insulation. As shown in
Cinch banding together with plastic buckles provided.
Cut off excess banding material.
Insulation straps with buckles
1
P/N 240007211, Rev. A [04/08]
Figure
Figure 2
2,