i-MOBIL M-1 User Manual page 38

USER MANUAL FOR i-MOBIL M-1
Fixed Dialing
1. Enter proper PIN2 password (this shall be
provided by the Network Operator) and then
press OK key, and then the mobile phone can
only dial fixed dialing numbers.
2. If password is correct, the submenu of FDN
would appear. Go to needed sub menu by
pressing Up-down Navigation Key and then
press OK to enter in.
FDN List：FDN List. Using Up-down
Navigation Key to switch between the
numbers, select " View" to check current
number.
Add: Add new numbers. Select "Save"
to store the number into FDN list.
Edit: Modify name and default number
in the list.
Delete: Switch between the numbers using
Up-down Navigation Key, press OK to
delete the selected number.
Status: Press Up-down Navigation Key to
- 74 -
USER MANUAL FOR i-MOBIL M-1
switch between status of
press OK to confirm selected status.
3. Select Exit (or short press power key) and
back to superior menu to finish all the settings.
Note: To ensure that SIM Card works normally, it
is suggested to restart the handset if any change
were made on the FDN.
Ejected Calls
You can refuse to receive the number by using this
function. Enter the password
press OK to enter the sub-menu to set up this function.
1. Number List: Select this and press OK to bright up
the Ejection Number List which you have already set
up. You can select number to edit. Press OK to
confirm.
2. Add: To add a new number that you want to eject.
Enter the number or use Left Key to bring up your
phone book list. Press OK to confirm after finish the
entering the number.
3. Erase: If you want take the number out of your
ejected number list, select the number by using
ON and
(default password is 1234),
- 75 -
OFF,