Table of Contents
Advertisement
To remove the microSD Memory Card:
1. Remove the battery cover.
2. Firmly press the card into the slot and release it. The
card should pop partially out of the slot.
3. Remove the card from the slot.
4. Replace the battery cover.
Installing the Battery
Before using your device for the first time, install the battery
and charge it fully.
Important! Before removing or replacing the battery, make
sure the device is switched off. To turn the device
off, hold down the
options pop up displays, then tap Power off.
To install the battery:
1. Slide the battery into the compartment (1) so that the
tabs on the end align with the slots at the bottom of the
phone, making sure the connectors align.
2. Gently press down to secure the battery (2).
12
DRAFT
Internal Use Only
key until the Device
To remove the battery:
Grip the battery at the top end and lift it up and out of
the battery compartment.
Replacing the Battery Cover
Position the battery cover over the battery
compartment and press down until you hear a click.
Caution! When replacing the battery cover, do not apply
pressure to the screen ("squeeze") as this can
damage the screen.
Advertisement
Table of Contents
