Advertisement
Mounting to a rod or ceiling wire with a Multi-Function Clip-Batwing: HPH16W,
HPH32W, HPH48W and HPH64W
HPHXXW J-Hooks (Fig.1) are pre-assembled to Multi-Function Clip-Batwings at the factory using
a fastener such as a rivet or a zinc plated ¼-20 x 3/8" pan head Phillips machine bolt and a
grade A ¼-20 hex Nylon locknut (Fig.2). A plain HPH J-Hook may be assembled to a UL listed
batwing clip in the field with the use of a similar fastener. Depress the batwing between your
fingers (Fig. 3). Attach the HPHXXW to 12 gauge ceiling wire or 1/4" threaded rod (Fig.4 and
Fig.6). Insert the cables and close the latch (Fig.5 and Fig.7). The latch must be in the closed
position as shown in Fig.8 to secure the cables and complete the installation.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
3
Advertisement
