Table of Contents
Advertisement
PICTURE CONTROL
• 4:3
The following selection will allow you to view a picture
with an original 4:3 aspect ratio, black bars will appear
on both the left and right of the screen.
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is moved to the
up and down.
NOTE
► You can only select 4:3, 16:9 (Wide), 14:9, Zoom/Cinema Zoom1 in Component mode.
► You can only select 4:3, Original, 16:9 (Wide), 14:9, Zoom/Cinema Zoom1 in HDMI mode.
►
In DTV/HDMI/Component (over 720p) mode, Just Scan is available.
You can only select 4:3 , 16:9 (Wide) in RGB-PC, HDMI-PC mode only.
►
42
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom
of the picture will be cropped.
• Cinema Zoom
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
Note:When enlarging or reducing the picture,
the image may become distorted.
◄ or ► button: Adjust enlarge proportion of
Cinema Zoom. The adjustment range is 1~16.
▼ or ▲ button: Move the screen.
Advertisement
Table of Contents
