Function Description - Ebird VLCD-5 Operation Manual

Function Description

4.1、 Speed display
Show current speed, unit Km/h and mile/h can be chosen.
4.2、 Energy indicator
Four horizontal blocks show energy of battery (each block, 25 percents of electric energy), flickering to
remind you to charge the battery.
4.3、 rip distan
T
Show trip distance.
4.4、 Odograph
Show total miles
4.5、 Record movement time ）
Record time while sensor get signal.
4.6、 （Average speed（AVG） ）
Show average speed.
4.7、 Power assist
Show power assist.4 levels power assist adjustable.
4.8、 Backlight
Switch among 2 levels brightness, default option is backlight off.
4.9、 Select wheel-diameter
Select wheel-diameter among14-32 inch. default option is 26-inch.
4.10、 Magnetic Steel number
Select the magnetic steel number of the speed sensor, default value is 1.
4.11、 Speed
Km/h or Mil/h
Select
4.12、 Function aux. Speed
Select function of 6km, default value is OFF.、
4.13、 Select Top Speed
Select top speed from 15-45 Km/h .Default is 25Km/h.
4.14、 Power adjustment
For TSDZ2 = 16.
Select power adjustment, default is 16.
4.15、 Language Selection
Select mode，default is Europe. Do not change!
4.16、 25speedlimit activation
Select function of 25km, default value is ON.
4.17、 Diagnostic code
According to the failure condition, the diagnosis codes will be displayed. The fault detection will be
launched automatically when rotating the handle and it will stop when the handle is reset.
ce(reset while power off )
.
, default is Km/h.
www.ebikekit.ch