Table of Contents
Advertisement
25km/h (speed limit function selection)
Use the
button to enter the 25/Km/h function selection, press
Default is ON.
5.5 Failure code
According to the failure condition, the diagnosis codes will be displayed. The fault detection will be launched
automatically when rotating the handle and it will stop when the handle is reset.
ERR-02
ERR-03
ERR-04
ERR-08
ERR-06
（Motor hall fault or motor short circuit）
( Controller failure)
( Low battery alarm)
( Moment when the signal does not turn the motor)
At start you have to wait for 3 sec. until you touch
the pedal, otherwise ERR-06
www.ebikekit.ch
25km/h
(
)
Turn the fault
buttons to switch between ON/OFF.
Advertisement
Table of Contents
