Standard Mode - Fisher TW-82P Operating Manual

TW-82P RECEIVER

STANDARD MODE

In this default configuration, the TW82P Receiver requires no
operator intervention to trace a line under most circumstances.
Only the volume can be adjusted in this mode.
The following values & conditions are displayed on the LCD display
in Standard Mode:
- Signal Strength
- Left/Right & Over-Target
- Azimuth
- Current Measure
- Depth
- Battery Strength
1. Signal Strength:
electromagnetic field emitted by the utility.
999: maximum value
0: minimum value
You may find different locations
where the Signal Strength value is
high. Use this reading as a relative
indicator as to where the utility is
located. Signal Strength is strongly
influenced by the depth of the
utility.
2. Left/Right & Over-Target:
relative to the center of the electromagnetic field.
Move to
the left
Indicates your proximity to the center of the
These indicators show your position
Move to
the right
You are over
the target
9