Auto Power-Down Receiver; Metric/Imperial Unit Of Measure - Fisher TW-82P Operating Manual

TW-82P RECEIVER
AUTO POWER-DOWN, RECEIVER
When 90 minutes have passed without the operator pressing
any control buttons, the Receiver will automatically power
down.
• Lower left of the display will indicate "OFF".
• Lower right of the display will count down from 10 to 0.
• The Receiver will then turn off.
To stop Auto Power-Down, press any button once.
METRIC / IMPERIAL UNIT OF MEASURE
To change the Receiver unit of measure, follow this procedure:
1. Start with the Receiver OFF.
2. Press-and-Hold
a. The Receiver will turn on in Standard mode.
b. After 6 seconds, the new unit of measure will indicate at the
bottom of the display.
c. If you continue to hold
will be displayed.
d. When you see the desired unit of measure, release
Receiver will commence operation using the last displayed
unit of measure.
for 6 seconds.
Display during Programming
, the alternate unit of measure
. The
17