Page 1
Retro Fit Windshield Washer Kit for Marinco Deluxe Style Wiper Arms Installation Instructions...
Page 2
Momentary on/off switch or button rated for 3 amps minimum • Butt connectors (2 pieces) for wire gauge you are using • Marinco wiper arms & blades (Must have Marinco deluxe style wiper arms and blades to ensure compatibility) • 12 volt battery Please read through all instructions prior to assembly www.marinco.com...
Slide the rubber tubing through the hole in the rivet clip and snap the clip onto the wiper arm spring rivet. Use the large’ 1 rivet clip with the following Marinco Deluxe Wiper Arms: 33010A/33110A, 33014A/33114A, 33070A/33170A, 33032A/33132A or 33037A/33137A.
Page 4
Retro Fit Windshield Washer Kit for Marinco Deluxe Style Wiper Arms Below Deck Components 1) To install the clear tubing below deck, press one end of the tubing onto the thru-deck fitting. If you are installing two thru-deck fittings, stretch the clear tubing across to the second thru-deck fitting and cut the tubing about 1”...
Retro Fit Windshield Washer Kit for Marinco Deluxe Style Wiper Arms Adjust Spray Heads To adjust the four spray heads on each nozzle, insert a small pin into the spray nozzle orifice and carefully rotate the nozzle to spray in the desired direction.