Turn the key to the Run position, and select "OK" using the middle bottom button. The Run position is the last
key click before the engine will start. DO NOT START THE ENGINE AT ANY TIME DURING THE
PROGRAMMING PROCESS! You should hear your seat belt chime and warning light on the instrument
panel when the key is in this position. For keyless ignition/push button start vehicles, press the ignition button
once to enter the Start/Run mode. DO NOT PRESS THE BRAKE PEDAL WHEN PRESSING THE
START BUTTON! The programmer will then read out the VIN number, and after a few seconds, display the
Main Menu.
1-1: MAIN MENU
Use the left and right buttons at the bottom of the screen to scroll through the menu options. Press the middle
button to 'Select' an option. Press the left button to go 'Back' to the last menu screen.
TUNING:
This is the main option in the programmer. It has selections for the Hypertech Power Tuning, and other
adjustable features.
DTC's (All Vehicles):
This option checks for Diagnostic Trouble Codes (DTC's).
QUICK COMMANDS:
This option has selections for adjustable features that don't require programming.
4
Need help?
Do you have a question about the 2000 and is the answer not in the manual?